Repair Kits

Oil pump pickup pipe sleeve seal — Opel / Vauxhall 2.0 CDTI

Kit contents

• 1 x aluminium sleeve seal
• 2 x Viton O-rings sealing the sleeve
• 1 x Viton O-ring for the oil level sensor plug
• 2 x Viton O-rings for the crankcase breather inside the oil pan
• 1 x Viton O-ring for the crankcase breather outside the oil pan

Why replace it

On the Opel 2.0 CDTI diesel, the O-ring between the oil pump and the pickup pipe hardens over time and lets oil pass. The resulting leak drops oil pressure and can lead to critical engine failure.

This aluminium sleeve replaces the faulty original seal and creates a permanent connection between the oil pump pickup pipe and the oil pan, fixing this known factory weakness. It does not deform like the original seal. Unlike the other version (without bolts), this one does not reduce the cross-section of the oil flow. The O-rings are made of Viton, resistant to heat and oil. Fitting is simple: remove the old seal and install the sleeve.

Compatibility

OE / OEM

• 55589549
• 646125

Have the round version without bolts? See the round sleeve repair kit.

Reinforced silicone hose for repairing a broken "swallow."
Repair your broken original part now and save a lot of money. You can install our kit in 15 minutes with simple tools.

BMW Double VANOS Seals – Beisan Systems

Genuine Beisan Systems repair kit for BMW Double VANOS, designed to restore sealing and correct operation of the VANOS system on BMW M52TU, M54 and M56 engines.

Beisan Systems is a US manufacturer specialised in repair solutions for BMW VANOS. Its products are developed to fix the typical wear problems in variable valve timing systems.

SelectParts.BG is the official Beisan Systems distributor for Bulgaria. We sell genuine products from stock with fast shipping across the EU.

Why does BMW Double VANOS need repair?

On M52TU, M54 and M56 engines the original VANOS seals lose their elasticity over time and stop sealing properly.

This can lead to incorrect valve timing control and poor engine running.

Possible symptoms of worn VANOS seals:

• Loss of power and torque at certain rpm
• Rough idle and uneven running
• Delayed throttle response
• Fluctuating rpm
• Higher fuel consumption
• Weaker pull and acceleration

These symptoms can have other causes too, so we recommend a diagnosis before the repair.

Why genuine Beisan Systems instead of a cheap Chinese kit?

Seal quality is critical for a reliable repair.

In our experience with cheap Chinese kits we have seen dimensional inaccuracy, difficult fitting and premature wear, including seals failing in under 10,000 km.

Poor-quality parts can lead to repeat failure and another VANOS teardown, which means extra labour cost.

Genuine Beisan Systems seals are developed specifically for these VANOS units, with a focus on the right materials, dimensional accuracy and durability.

When repairing a VANOS, saving on cheap seals is rarely a saving in the long run.

Beisan Systems advantages

• Genuine product from US manufacturer Beisan Systems
• Dedicated solution for BMW Double VANOS
• Replace worn seals without replacing the whole unit, when it is otherwise in good condition
• Developed with attention to materials and machining accuracy
• Restores sealing on the matching VANOS units
• Can restore correct engine running when the fault is seal related

BMW engine compatibility

The repair kit is intended for compatible versions of:

• BMW M52TU – Double VANOS
• BMW M54 – Double VANOS
• BMW M56 – Double VANOS

Important: confirm compatibility for your specific engine and VANOS version.

Why order from SelectParts.BG?

Official Beisan Systems distributor for Bulgaria – genuine manufacturer parts only.

Real stock – fast processing and shipping of in-stock items.

Fitment check – we help you choose the right parts for your BMW engine.

Quality and reliability – dedicated repair parts instead of cheap substitutes.

Competitive prices – genuine Beisan Systems parts with EU shipping.

Manufacturer: Beisan Systems
Application: BMW Double VANOS
Compatible engines: M52TU, M54, M56
Brand origin: USA

Oil pump pickup seal repair kit Opel / Vauxhall 2.0 CDTI

Kit contents

• 1 x sleeve seal (aluminium)
• 2 x O-rings for the sleeve (Viton)
• 1 x O-ring for the oil level sensor plug (Viton)
• 2 x O-rings for the crankcase breather inside the oil pan (Viton)
• 1 x O-ring for the crankcase vent outside the oil pan (Viton)

Description

The oil pump pickup seal is an O-ring between the oil pump and the pickup pipe on the Opel 2.0 CDTI diesel engine. Over time the seal hardens and lets oil bypass, causing a leak that lowers lubrication pressure — a potentially critical engine failure.

Our aluminium sleeve seal replaces the faulty original seal and creates a permanent connection between the pickup pipe and the oil pan. It does not deform. The O-rings are made of Viton, a material resistant to heat and oil. Fitting is simple: remove the old seal and insert the new sleeve.

Compatibility

• Opel / Vauxhall Insignia A (2009–2017)
• Opel / Vauxhall Cascada (2013–2018)
• Opel / Vauxhall Astra J (2009–2015)
• Opel / Vauxhall Zafira C (2012–2018)
• Chevrolet Malibu (V300) 2.0D, engine LBS (2012→)
• Suzuki SX4 (EY, GY) 1.6 DDiS, engine D16AA 120 hp (2013→)
• Suzuki SX4 (JY) 2.0 DDiS, engine D20AA 135 hp (2009→)
• Suzuki Vitara (LY) 1.6 DDiS, engine D16AA 120 hp (2015→)
• Saab 9-5 (YS3G) 2.0 TTiD, engine A20DTR 190 hp (2010–2012)
• Saab 9-5 (YS3G) 2.0 TTiD, engine A20DTH 160 hp (2010–2012)
• Saab 9-3 (YS3F) 1.9 TTiD, engine Z19DTR 180 hp (2008–2012)

Engine codes

• 2.0 CDTI A20DTC / A20DTL — 81 kW (110 hp)
• 2.0 CDTI A20DTJ / A20DT — 96 kW (131 hp)
• 2.0 CDTI A20DTE — 88 kW (120 hp)
• 2.0 CDTI A20DTE — 103 kW (140 hp)
• 2.0 CDTI A20DTH — 118 kW (160 hp)
• 2.0 CDTI A20DTH — 120 kW (163 hp), from 07.2013
• 2.0 CDTI A20DTR — 140 kW (190 hp)
• 2.0 CDTI A20DTR — 143 kW (195 hp), from 2012

OEM / OE numbers

• 55589549
• 646125

Have the oblong 2-bolt version? See the oblong oil pump sleeve with 2 bolts.

BMW Single VANOS full rebuild kit M52 / M50TU

Kit contents

• 2 x Beisan Systems seals
• 2 x Beisan Systems needle bearings
• 1 x Beisan Systems metal ring
• 1 x Elring VANOS housing gasket
• 2 x VANOS housing locking bolts
• 2 x washers

Why this kit

• Upgraded, durable ring materials
• Precisely machined Teflon sliding rings fit the pistons and VANOS housing perfectly
• High-temperature Viton O-rings keep the Teflon rings tight on the sliding surface
• Excessive bearing play in the pistons is minimised — the VANOS no longer rattles
• Two new needle bearings give noticeably smoother engine running
• Housing gasket by Elring, the BMW original-equipment supplier — identical to the original BMW metal gasket

OEM number

• 11361748819

Beisan Systems bearings for BMW Double VANOS

Genuine Beisan Systems bearing repair kit for BMW Double VANOS, designed to repair the bearing assemblies in the VANOS unit on compatible BMW M52TU, M54 and M56 engines.

Over time, wear in the bearing components can cause increased mechanical play and the typical VANOS rattle. Beisan Systems offers dedicated components to restore correct mechanical operation of the system.

When do the VANOS bearings need repair?

Possible signs of wear:

• Typical metallic rattle from the VANOS unit
• Increased mechanical play in the bearing assemblies
• Noise at certain engine speeds
• Component wear after long service

Important: not every engine rattle comes from the VANOS. We recommend a diagnosis first.

Why genuine Beisan Systems bearings?

The quality and dimensional accuracy of the bearing components are critical for correct VANOS operation.

In our experience with cheap Chinese repair kits we have seen poor machining accuracy, fitting difficulties and premature wear — in some cases a service life under 10,000 km. Unsuitable parts can mean taking the VANOS apart again and paying for a second repair.

Advantages

• Genuine product from the US manufacturer Beisan Systems
• Dedicated bearing components for BMW Double VANOS
• Designed to repair worn bearing assemblies
• Can eliminate mechanical play and rattle when the cause lies in these bearing components
• Repair without replacing the whole VANOS unit, provided its other parts are in good condition

Compatibility

For compatible versions of BMW engines with Double VANOS:

• BMW M52TU
• BMW M54
• BMW M56

Before ordering, we recommend checking the engine and the exact VANOS version.

For a full seal overhaul, see also our Double VANOS rebuild kit.

Repair bracket removing error P2015 suitable for plastic manifold. Corrects the play in the geometry of the swirl flaps of the intake manifold for 2.0TDI Common Rail engines.
For all VAG cars with 2.0TDI Common Rail engines 2008-2014 with plastic and aluminum manifold with the following numbers: Aluminum -> 03L129711E,
Plastic -> 03L129711AG, 03L129086
 
Fix your TDI CR Diesel P2015 error code now and save money. You can install our kit in 15 minutes with simple tools.
Suitable for aluminum manifold part number 03L129711E only with V157 or V120 actuator.
Installing the bracket now will prevent potential problems later.
 
Material and color:
Made of high quality aluminum.
Color: silver.
 
Includes:
1x repair bracket kit.
 
Engine Codes:
CAAB 2.0 102 HPCAGA 2.0 143 HPCAGB 2.0 136 HPCAGC 2.0 120 HPCAHA 2.0 170 HPCAHB 2.0 163 HPCBAA 2.0 136 HPCBAB 2.0 140 HPCBAC 2.0 143 HPCBBB 2.0 170 HPCBDA 2.0 136 HPCBDB 2.0 140 HPCBDC 2.0 110 HPCEGA 2.0 170 HPCJAA 2.0 140 HPCMEA 2.0 143 HP

BMW Single VANOS seal kit – Beisan Systems

Genuine Beisan Systems seal repair kit for BMW Single VANOS, designed to restore sealing in the variable valve timing unit on compatible M50TU, M52, US S50 and S52 engines.

Beisan Systems is a US manufacturer specialising in BMW VANOS repair solutions, developed to fix the typical wear problems of the system.

SelectParts.BG is the official Beisan Systems dealer for Bulgaria. Genuine parts in stock with fast shipping.

When does a Single VANOS need repair?

Over time the original VANOS seals lose their properties, which reduces hydraulic sealing and makes the system work incorrectly. Possible symptoms:

• Reduced pulling power in certain rev ranges
• Delayed throttle response
• Uneven engine running
• Weaker mid-range acceleration
• Higher fuel consumption

These symptoms can have other causes too, so diagnostics are recommended before the repair.

Why genuine Beisan Systems instead of a cheap copy?

Material quality and dimensional accuracy of the seals are critical for a reliable repair. With cheap copy kits we have seen fitting difficulties, inaccurate dimensions and early wear — in some cases a service life under 10,000 km. Poor seals mean a repeat failure and paying for the labour twice.

Benefits

• Genuine product from the US manufacturer Beisan Systems
• Dedicated solution for BMW Single VANOS
• Replaces the worn seals
• Restores correct VANOS operation when the fault is seal-related
• No need to replace the whole unit if its other parts are in good condition

Compatibility

• BMW M50TU
• BMW M52
• BMW S50 (US version)
• BMW S52 (US version)

Important: the kit does not fit every VANOS system. Check the exact engine and VANOS version before ordering.

Manufacturer: Beisan Systems
Application: BMW Single VANOS
Compatible engines: M50TU, M52, S50 US, S52 US

BMW 2.0d / 3.0d vacuum pump seal repair kit – M47N2, M57N, M57N2

Seal repair kit for the vacuum pump on BMW M47N2, M57N and M57N2 diesel engines. The kit contains 2 O-rings, including the large square-section ring.

Important: E60, E63, E65, E53 and E70 with M47N2, M57N2 and M57N need the large square-section ring. Kits without it will not fix the problem.

Compatibility

• Models: BMW E60, E61, E65, E66, E67, E87, E90, E91, E92, X3 E83, X5 E70, X6 E71 / E72
• Engines: 2.0d and 3.0d diesel – M47N2, M57N, M57N2
• OE number: 11667791232

Detailed compatibility

• BMW 1 (E87) 120 d 1995 163 120 M47 D20 (204D4), N47 D20 A, N47 D20 C 2003/11 - 2012/09
• BMW 1 (E87) 120 d 1995 177 130 M47 D20 (204D4), N47 D20 A, N47 D20 C 2003/11 - 2012/09
• BMW 3 coupe (E92) 325 d 155 KW 2993 CCM 211PS 2007/01 – 2009/12
• BMW 3 coupe (E92) 325 d 145 KW 2993 CCM 197PS 2007/03 – 2013/12
• BMW 3 coupe (E92) 330 d 170 KW 2993 CCM 231PS 2006/09 – 2013/12
• BMW 3 coupe (E92) 330 xd 170 KW 2993 CCM 231PS 2006/09 – 2013/12
• BMW 3 (E90) 318 d 90 KW 1995 CCM 122PS 2005/09 – 2011/12
• BMW 3 (E90) 320 d 130 KW 1995 CCM 177PS 2007/09 – 2011/12
• BMW 3 (E90) 320 d 120 KW 1995 CCM 163PS 2005/01 – 2011/12
• BMW 3 (E90) 320 d 110 KW 1995 CCM 150PS 2005/09 – 2011/12
• BMW 3 (E90) 325 d 145 KW 2993 CCM 197PS 2006/09 – 2011/12
• BMW 3 (E90) 330 d 170 KW 2993 CCM 231PS 2005/09 – 2011/12
• BMW 3 (E90) 330 xd 170 KW 2993 CCM 231PS 2005/09 – 2011/12
• BMW 3 Touring (E91) 318 d 90 KW 1995 CCM 122PS 2005/09 – 2012/06
• BMW 3 Touring (E91) 320 d 130 KW 1995 CCM 177PS 2007/09 – 2012/06
• BMW 3 Touring (E91) 320 d 110 KW 1995 CCM 150PS 2005/09 – 2012/06
• BMW 3 Touring (E91) 320 xd 130 KW 1995 CCM 177PS 2007/09 – 2012/06
• BMW 3 Touring (E91) 325 d 145 KW 2993 CCM 197PS 2006/09 – 2012/06
• BMW 3 Touring (E91) 330 d 170 KW 2993 CCM 231PS 2005/09 – 2012/06
• BMW 3 Touring (E91) 330 xd 170 KW 2993 CCM 231PS 2005/09 – 2012/06
• BMW 5 (E60) 520 d 130 KW 1995 CCM 177PS 2007/09 – 2010/03
• BMW 5 (E60) 520 d 110 KW 1995 CCM 150PS 2005/09 – 2010/03
• BMW 5 (E60) 520 d 120 KW 1995 CCM 163PS 2005/07 – 2010/03
• BMW 5 (E60) 525 d 145 KW 2993 CCM 197PS 2007/01 – 2010/03
• BMW 5 (E60) 525 xd 145 KW 2993 CCM 197PS 2007/01 – 2010/03
• BMW 5 (E60) 530 d 173 KW 2993 CCM 235PS 2007/01 – 2010/03
• BMW 5 (E60) 530 d 170 KW 2993 CCM 231PS 2003/07 – 2010/03
• BMW 5 (E60) 530 d 155 KW 2993 CCM 211PS 2003/07 – 2010/03
• BMW 5 (E60) 530 xd 170 KW 2993 CCM 231PS 2005/07 – 2010/03
• BMW 5 (E60) 530 xd 173 KW 2993 CCM 235PS 2007/01 – 2010/03
• BMW 5 (E60) 535 d 210 KW 2993 CCM 286PS 2007/01 – 2010/03
• BMW 5 (E60) 535 d 200 KW 2993 CCM 272PS 2004/09 – 2010/03
• BMW 5 Touring (E61) 520 d 120 KW 1995 CCM 163PS 2005/07 – 2010/12
• BMW 5 Touring (E61) 520 d 130 KW 1995 CCM 177PS 2007/09 – 2010/12
• BMW 5 Touring (E61) 520 d 110 KW 1995 CCM 150PS 2005/09 – 2010/12
• BMW 5 Touring (E61) 525 d 120 KW 2497 CCM 163PS 2004/12 – 2010/12
• BMW 5 Touring (E61) 525 d 145 KW 2993 CCM 197PS 2007/01 – 2010/12
• BMW 5 Touring (E61) 525 xd 145 KW 2993 CCM 197PS 2007/01 – 2010/12
• BMW 5 Touring (E61) 530 d 160 KW 2993 CCM 218PS 2004/06 – 2010/12
• BMW 5 Touring (E61) 530 d 170 KW 2993 CCM 231PS 2005/07 – 2010/12
• BMW 5 Touring (E61) 530 xd 173 KW 2993 CCM 235PS 2007/01 – 2010/12
• BMW 5 Touring (E61) 530 xd 170 KW 2993 CCM 231PS 2005/07 – 2010/12
• BMW 5 Touring (E61) 535 d 210 KW 2993 CCM 286PS 2007/01 – 2010/12
• BMW 5 Touring (E61) 535 d 200 KW 2993 CCM 272PS 2004/09 – 2010/12
• BMW 7 (E65, E66, E67) 730 d 155 KW 2993 CCM 211PS 2002/10 – 2008/07
• BMW 7 (E65, E66, E67) 730 Ld 170 KW 2993 CCM 231PS 2005/07 – 2009/12
• BMW X3 (E83) 2.0 d 130 KW 1995 CCM 177PS 2007/09 – 2009/03
• BMW X3 (E83) 2.0 d 110 KW 1995 CCM 150PS 2004/10 – 2010/12
• BMW X3 (E83) 3.0 d 150 KW 2993 CCM 204PS 2004/01 – 2005/08
• BMW X3 (E83) xDrive 20 d 130 KW 1995 CCM 177PS 2008/09 – 2010/08
• BMW X3 (E83) xDrive 20 d 120 KW 1995 CCM 163PS 2008/09 – 2010/08
• BMW X5 (E70) 3.0 d 155 KW 2993 CCM 211PS 2007/02 – 2008/09
• BMW X5 (E70) 3.0 d 173 KW 2993 CCM 235PS 2007/02 – 2008/09
• BMW X5 (E70) 3.0 sd 210 KW 2993 CCM 286PS 2007/09 – 2009/02
• BMW X6 (E71, E72) 30 d 173 KW 2993 CCM 235PS 2008/05 – 2008/08
• BMW X6 (E71, E72) 35 d 210 KW 2993 CCM 286PS 2008/05 – 2008/08

Beisan Systems metal bushings for BMW double VANOS

Genuine product from the American company Beisan Systems.

Compatibility

• BMW with M52TU engines
• BMW with M54 engines
• BMW with M56 engines

Double VANOS rebuild kit BMW M52TU / M54 with needle bearings

Complete kit for a full double VANOS overhaul. The rings are made of high-quality, durable materials. Precision-turned Teflon sliding rings fit the VANOS pistons and housing perfectly, while high-temperature Viton O-rings hold the Teflon rings tightly against the sliding surface.

The kit minimises excessive bearing play in the pistons, so the VANOS no longer tends to rattle. The new needle bearings complete the repair and make the engine run noticeably smoother. The housing gasket is made by Elring, an OE supplier to BMW, and is identical to the original metal gasket.

Kit contents

• 10 x MJ seals
• 4 x needle bearings
• 2 x metal rings
• 1 x VANOS unit gasket (Elring)
• 1 x Drei Bond liquid metal, 30 g
• 2 x VANOS housing locking bolts
• 2 x washers

Engines

• BMW M52TU
• BMW M54

OEM number

• 11361440142

P2015 Repair Swirl Flaps VW 2.0TDI
 
Application:
 
For all VAG 2.0TDI common rail engines 2008 - 2014 with aluminum manifold!!!
Reference OEM Number:
03L129711E,03L129711AG,03L129086.etc.

Engine Code:

CAAB 2.0 102 HP
CAGA 2.0 143 HP
CAGB 2.0 136 HP
CAGC 2.0 120 HP
CAHA 2.0 170 HP
CAHB 2.0 163 HP
CBAA 2.0 136 HP
CBAB 2.0 140 HP
CBAC 2.0 143 HP
CBBB 2.0 170 HP
CBDA 2.0 136 HP
CBDB 2.0 140 HP
CBDC 2.0 110 HP
CEGA 2.0 170 HP
CJAA 2.0 140 HP
CMEA 2.0 143 HP

Specification:
 
Fix your TDI CR Diesel P2015 fault code now and save money. You can install our kit in 15 minutes with simple tools.
Suitable for aluminum manifold Part Number 03L129711E only with V157 or V120 drive actuator.
Installing a bracket now will prevent problems later. With this bracket, you will not feel the wear of the mechanism and the fault code it creates.

Material and color:
 
Made of high quality aluminum.
Color: silver.
 
Includes:
1x repair bracket kit.

Compatibility by OEM number:

038103469
038103469AD
038103469AE
038103469AH
038103469AJ
038103469M
038103469S
038103469R
038103469T

Compatibility by model:

Audi A4 B5 1994-2001
Audi A4 B6 2000-2005
Audi A4 B7 2004-2008
Audi A6 C5 1997-2005
Ford Galaxy 1996-2006
Seat Alhambra 2001-2010
Skoda Superb 2002-2008
VW Bora 1998-2005
VW Golf IV 1998-2005
VW Passat B5 2000-2005
VW Passat B6 2005-2010
VW Passat B7 2010-2014
VW Sharan 1998-2010
VW T5 2003-2009

Engines:

1.9 TDI: ANU, ASZ, AUY, AVB, AVF, AWX, AXB, AXC, BKE, BPZ, BRB, BSV, BTB, BVK
2.0 TDI: BPW, BSS, BWW

BMW M50TU / M52 Single VANOS Bearing Set – Beisan Systems

The BMW Single VANOS bearing set is a genuine product of the American company Beisan Systems. A new pair of needle bearings for the splined shaft of the single VANOS, suitable for BMW M50TU, M52, US S50 and S52 engines.

Don't take chances with cheap Chinese kits that barely last 10,000 km, fit poorly and put your car's reliability at risk.

Specifications:

• Manufacturer: Beisan Systems (USA)
• Part number: BS013
• Type: needle bearings for the VANOS splined shaft
• Fitted together with the Single VANOS rattle repair kit (BS012)
• Disassembly requires a modified 18 mm socket (BS093), or 17 mm (BS092) for 1993 cars

What's in the kit:

• 1 pair of needle bearings

Fits:

• BMW M50TU
• BMW M52
• BMW US S50
• BMW S52

Not sure it fits your car? Send us your VIN and we'll check compatibility for you.

Beisan Systems 18mm modified socket for BMW Single VANOS

The Beisan Systems 18mm modified socket is a special tool for disassembling the BMW single VANOS unit during the rattle repair with the Beisan metal bushing (BS012). Genuine product from the American company Beisan Systems.

Which socket do you need?

• 18mm – for single VANOS models after 1993
• 17mm – for 1993 model cars (the 18mm socket does not fit these)

Not sure which socket you need? Send us your VIN and we'll check.

DISA Delete Plug BMW M54 B22 B25 B30 – Tafmet

The DISA delete plug for BMW M54 (B22, B25, B30) blanks off the DISA valve port and seals with an OE Viton O-ring that resists oil as well as low and high temperatures. This version of the O-ring is well polished for a better seal.

Specifications:

• Material: high-quality aluminium
• Seal: OE Viton O-ring
• Designed and made by the Polish tuning company Tafmet
• DISA valve OEM numbers: 11617544805, 11617544806, 11617502275, 11617502269

What's in the kit:

• 1 x aluminium DISA plug with Viton O-ring

Fits:

Important: after fitting the plug, the engine ECU (DME) must be reprogrammed so that no fault code appears.

Not sure it fits your car? Send us your VIN and we'll check compatibility for you.

Beisan Systems metal bushing for BMW single VANOS

Genuine product from the American company Beisan Systems. Don't risk cheap copies that barely last 10,000 km, fit poorly and put your car's reliability at risk.

Compatibility

• BMW M50TU
• BMW M52
• BMW S50 (US)
• BMW S52 (US)

BMW M52TU DISA Valve Repair Kit – Aluminium

The BMW M52TU DISA valve repair kit in aluminium is top quality and made in Germany. It is precision-milled and supplied with all the parts needed for assembly. The kit fits ALL M52TU engines.

For genuine BMW DISA units only!

Specifications:

• Material: aluminium, precision-milled
• Made in: Germany
• OEM number of the DISA unit: 11611440049

What's in the kit:

• DISA flap
• Lever
• High-strength threaded shaft
• Spring washer for the threaded shaft
• Lock washer
• O-ring

Fits:

• All BMW M52TU engines

Not sure it fits your car? Send us your VIN and we'll check compatibility for you.

"Swallow" hose Elring for Mercedes Benz OM642 280CDI 320CDI.

Repair kit for fault P2015 — VAG 2.7 / 3.0 / 4.2 TDI

Fault P2015 (008213) is caused by a broken plastic stop on the swirl flap shaft in the manifold. Our bracket kit limits actuator travel to the original range — without replacing the whole actuator.

Advantages

• Installation in about 30 minutes
• Clears faults P2015, P2004, P2009, P2016, P2017
• Saves replacing the whole actuator

OEM actuator numbers

059129086J / 059129086L / 059129086G / 059129086K

OEM manifold numbers

059 129 712 BK / 059 129 712 BG / 059 129 712 P

Compatibility — Audi A4

• 8EC B7 — 2.7 TDI 163 HP (BSG), 180 HP (BPP), 3.0 TDI 204 HP (BKN), 233 HP (ASB)
• 8K2 B8 — 2.7 TDI 190 HP (CAMA, CGKA), 3.0 TDI 240 HP (CAPA, CCLA, CCWA)
• 8ED B7 Avant — 2.7 TDI 163/180 HP, 3.0 TDI 204/233 HP
• 8K5 B8 Avant — 2.7 TDI 190 HP, 3.0 TDI 240 HP
• 8KH B8 Allroad — 3.0 TDI 240 HP (CCWA)
• 8H7 B6/B7 Cabriolet — 2.7 TDI 180 HP, 3.0 TDI 204/233 HP

Compatibility — Audi A5

• 8T3 — 2.7 TDI 163 HP (CAMB, CGKB), 190 HP (CAMA, CGKA), 3.0 TDI 204/211/240/245 HP
• 8F7 Cabriolet — 2.7 TDI 190 HP, 3.0 TDI 204/240/245 HP
• 8TA Sportback — 2.7 TDI 190 HP, 3.0 TDI 204/240/245 HP

Compatibility — Audi A6

• 4F2 C6 — 2.7 TDI 163/180/190 HP (BSG, BPP, CANA, CANB, CANC, CAND), 3.0 TDI 211/225/233/240 HP (BNG, BMK, ASB, CDYA, CDYB, CDYC)
• 4G2 C7 — 3.0 TDI 204 HP (CLAA, CLAB), 245 HP (CKVB, CKVC), 313 HP (CGQB)
• 4F5 C6 Avant / 4G5 C7 Avant — same engines
• 4FH C6 Allroad — 2.7 TDI 163/180/190 HP, 3.0 TDI 211/233/240 HP

Compatibility — Audi A7 / A8 / Q5 / Q7

• A7 Sportback 4GA — 3.0 TDI 204/245/313 HP
• A8 4E — 3.0 TDI 211/233 HP; A8 4H — 3.0 TDI 204/211/250 HP
• Q5 8R — 3.0 TDI 240 HP (CCWA)
• Q7 4L — 3.0 TDI 211/224/233/240/245 HP (BUN, CASB, CATA, BUG, CASA, CCMA, CJGA, CJGB, CLZB, CRCA)

Compatibility — Volkswagen

• Touareg 7LA/7L6/7L7 — 3.0 V6 TDI 225 HP (BKS, CATA), 240 HP (CASA, CASC)
• Touareg 7P5 — 3.0 V6 TDI 204 HP (CASD, CJMA), 240 HP (CASA, CNRB), 245 HP (CJGD)
• Phaeton 3D — 3.0 V6 TDI 240 HP

Order online from SelectParts.bg with fast delivery across Bulgaria.

BMW M54B22 / M54B25 DISA Valve Repair Kit – Aluminium

The BMW M54B22 and M54B25 DISA valve repair kit in aluminium is top quality and made in Germany. It is precision-milled and supplied with all the parts needed for assembly. The kit fits ALL M54B22 and M54B25 engines.

For genuine BMW DISA units only!

Specifications:

• Material: aluminium, precision-milled
• Made in: Germany
• OEM numbers of the DISA unit: 11617544806, 11617502269

What's in the kit:

• DISA flap
• Lever
• High-strength threaded shaft
• Spring washer for the threaded shaft
• Lock washer
• O-ring

Fits:

• BMW E46 320i, 325i, 325xi, 325Ci
• BMW E39 520i, 525i
• BMW E60 520i, 525i
• BMW E83 X3 2.5i
• BMW Z3 2.5i
• BMW E85 Z4 2.5i

Not sure it fits your car? Send us your VIN and we'll check compatibility for you.

Hoses for turbo and intake for Mercedes with OM642 engines.
Compatibility:- MERCEDES W 164 M Class- MERCEDES X 164 GL- MERCEDES 211 E Class- MERCEDES W 251 R Class- MERCEDES W 221 S Class- JEEP GRAND CHEROKEE WK / DODGE /CHRYSLER 300C ; COMMANDER 3.0 CRD
For engines: OM642 DIESEL (from: 07/2006 to: 07/2008)280 CDI / 300 CDI / 320 CDI / 350 CDIOEM: A6420940480 ; A6420940080 ; A6420940580 ; 6420940080 ; 6420940580 ; 6420940480

Suitable for the following models:

323Ti Touring 99-00
323i/323is/ Ci 99-00
325i/325Ci/325Ci Conv.
325Ti Touring/323iC 2001-2005
328i 1999-2002
328Ci 1999-2000
330Ci/330i/330Ci 2001-2005
Z4 E85
2.0i 2.2i 2.5i 3.0i 2003-2013
NOT for XI  or M3

LED Headlights for Golf 7, Osram LEDriving
 
Original tuning LED headlights for Golf 7 from Osram, Germany with 2 years warranty.
 
These full LED headlights offer an innovative design to impressively complement the individual look of your car. OSRAM LEDriving front lights provide precise illumination in front of your vehicle and on the road and are also an upgrade to the latest premium OEM technology. OSRAM LEDriving headlights are complete LED headlights, equipped with LED position lights, LED low beam, LED high beam, LED daytime running lights and a dynamic LED indicator.
 
Thanks to long-lasting, high-performance, intensely bright LEDs, they provide up to 200% more light, impress with up to 100% whiter light, and are characterized by an illumination range that can reach up to 200m. In addition, thanks to modern light guide technology and modern diffuser material, they convince with homogeneous light distribution and pixel-free optics. All these aspects lead to the possibility of improved perception of your vehicle and therefore to increased safety in road traffic. OSRAM also offers a 2-year warranty.
 
OSRAM tested quality according to DIN EN ISO/IEC 17025. OSRAM LEDriving front headlights have been tested in our DIN-certified environmental simulation laboratory for extreme external influences in terms of water, dust, low and high temperatures, UV light and continuous vibrations and validated with IP protection class IP69K.

Compatibility by model:
Mercedes A217 S-Class, 2015Mercedes C216 (W216) S-Class, 2006-2013Mercedes C217 (W217) S-Class, 2014Mercedes W221 S-Class, 2005-2013Mercedes W222 S-Class, 2013-2017Mercedes R230 SL-Class, 2001-2012Mercedes R199 (W199) SLR-Class, 2004Mercedes Sprinter 906, 2006-2018
 
Compatibility by OEM number:
A2308300084

Outer diameter - 51 mm.
Compatibility by OEM number:

0248.L1
0248L1
0248L1

Compatibility by model:
Fiat Scudo (270_, 272_), model produced from 2007
 
1.6 D Multijet; 1560 ccm - 90 HP / 66 kW; engine: 9HU; Year of manufacture: 2007.01 -
Mazda 3 (BK), Year of manufacture: 2003-2009
 
1.6 DI Turbo; 1560 ccm - 109 HP / 80 kW; engine: Y601; Year of manufacture: 2004.06 - 2009.06
1.6 MZ-CD; 1560 ccm - 90 HP / 66 kW; engine: Y406; Year of manufacture: 2006.06 - 2009.12
Mazda 3 Saloon (BK), Year of manufacture: 1999-2009
 
1.6 DI Turbo; 1560 ccm - 109 HP / 80 kW; engine: Y601; Year of manufacture: 2004.06 - 2009.06
Mazda 3 (BL), Year of manufacture: 2008-2014
 
1.6 MZR CD; 1560 ccm - 109 HP / 80 kW; engine: Y601, Y642); Year of manufacture: 2008.12 - 2013.05
Mazda 3 Saloon (BL), model produced from 2008
 
1.6 MZR CD (BL12); 1560 ccm - 109 HP / 80 kW; engine: Y642; Year of manufacture: 2008.12 - 2013.05
MINI (R56), Year of manufacture: 2005-2014
 
Cooper D; 1560 ccm - 109 HP / 80 kW; engine: 9Hz (DV6TED4), W16 D16; Year of manufacture: 11.2006 - 09.2010
MINI Clubman (R55), Year of manufacture: 2006-2015
 
Cooper D; 1560 ccm - 109 HP / 80 kW; engine: 9HZ (DV6TED4); Year of manufacture: 10.2007 - 02.2010
Suzuki Liana (ER, RH_), model produced from 2001
 
1.4 DDiS (RH 414D); 1398 ccm - 90 HP / 66 kW; engine: 8HY; Year of manufacture: 2004.04-
Suzuki Liana liftback, model produced from 2001
 
1.4 DDiS (RH 414D); 1398 ccm - 90 HP / 66 kW; engine: 8HY; Year of manufacture: 2004.04-2007.12
Suzuki SX4 (EY, GY), model produced from 2006
 
1.6 DDiS (RW 416D); 1560 ccm - 90 HP / 66 kW; engine: 9HX; Year of manufacture: 2007.04 -
Volvo C30 (533), Year of manufacture: 2006-2013
 
1.6 D; 1560 ccm - 109 HP / 80 kW; engine: D 4164 T; Year of manufacture: 10.2006 - 12.2012
Volvo S40 II (544), Year of manufacture: 2003-2012
 
1.6 D; 1560 ccm - 110 HP / 81 kW; engine: D 4164 T; Year of manufacture: 01.01.2005 - 12.12.2012
Volvo S80 II (124), model produced from 2006
 
1.6 D DRIVe; 1560 ccm - 109 HP / 80 kW; engine: D 4164 T; Year of manufacture: 01.2010 - 12.2011
Volvo V50 (545), Year of manufacture: 2003-2012
 
1.6 D; 1560 ccm - 109 HP / 80 kW; engine: D 4164 T; Year of manufacture: 2005.03 - 2012.12
1.6 D; 1560 ccm - 110 HP / 81 kW; engine: D 4164 T; Year of manufacture: 01.01.2005 - 12.12.2011
Volvo V70 III (135), model produced from 2007
 
1.6 D; 1560 ccm - 109 HP / 80 kW; engine: D 4164 T; Year of manufacture: 07.2009 - 12.2011

Outer diameter - 56 mm.
Compatibility by OEM number:

0607145
0607697
55561426
55573746

Compatibility by model:

Opel Ampera (R12) 2011-2015

EV 150; 1398 ccm - 151 KM / 111 kW; Engine: A 14 XFL

Opel Astra IV J 2009-2015

1.4 Turbo; 1364 ccm - 120 KM / 88 kW; A 14 NEL
1.4 LPG; 1364 ccm - 140 KM / 103 kW; A 14 NET
1.4 Turbo; 1364 ccm - 140 KM / 103 kW; A 14 NET
1.4; 1398 ccm - 87 KM / 64 kW; A 14 XEL
1.4; 1398 ccm - 100 KM / 74 kW; A 14 XER

Opel Corsa D 2009-2014

1.2; 1229 ccm - 69 KM / 51 kW; A 12 XEL
1.2; 1229 ccm - 86 KM / 63 kW; A 12 XER
1.2 LPG; 1229 ccm - 83 KM / 61 kW; A 12 XER
1.2 LPG; 1229 ccm - 86 KM / 63 kW; A 12 XER
1.4; 1398 ccm - 87 KM / 64 kW; A 14 XEL
1.4; 1398 ccm - 100 KM / 74 kW; A 14 XER
1.4 LPG; 1398 ccm - 87 KM / 64 kW; A 14 XEL

Opel Insignia 2011-2017

1.4; 1364 ccm - 140 KM / 103 kW; A 14 NET
1.4 LPG; 1364 ccm - 140 KM / 103 kW; A 14 NET

Opel Meriva B 2010-2017

1.4; 1364 ccm - 120 KM / 88 kW; A 14 NEL, B 14 NEL
1.4; 1364 ccm - 140 KM / 103 kW; A 14 NET, B 14 NET
1.4; 1398 ccm - 100 KM / 74 kW; A 14 XER
1.4 LPG; 1364 ccm - 120 KM / 88 kW; A 14 NEL, B 14 NEL

Opel Zafira C from 2012

1.4; 1364 ccm - 120 KM / 88 kW; A 14 NEL
1.4; 1364 ccm - 140 KM / 103 kW; A 14 NET
1.4 LPG; 1364 ccm - 140 KM / 103 kW; A 14 NET
1.6; 1598 ccm - 170 KM / 125 kW; A 16 XHT
1.6 CNG; 1598 ccm - 150 KM / 110 kW; A 16 XNT
1.8; 1796 ccm - 115 KM / 85 kW; A 18 XEL
1.8; 1796 ccm - 140 KM / 103 kW; A 18 XER
2.0 BiTurbo CDTi; 1956 ccm - 194 KM / 143 kW; A 20 DTR
2.0 CDTi; 1956 ccm - 130 KM / 96 kW; A 20 DT, Z 20 DTJ, Y 20 DTJ
2.0 CDTi; 1956 ccm - 160 KM / 118 kW; A 20 DTH
2.0 CDTi; 1956 ccm - 165 KM / 121 kW; A 20 DTH
2.0 CDTi; 1956 ccm - 110 KM / 81 kW; A 20 DTL

BMW X3 X5 X6 xDrive Transfer Case Actuator Gear Set

The xDrive transfer case actuator gear in your BMW wears out over time. Do you have a problem with the brakes, ABS and 4x4? Are all the warning lights on? This is a common cause of those symptoms.

An actuator motor is attached to the transfer case, and inside it is a low-quality plastic gear driven by a metal worm gear. Over time the nylon wears and strips, and the gear stops turning. BMW does not supply this part separately – it sells a complete new motor at a high price, which will fail again because of the same nylon gear.

Fit our improved drive gears and restore your actuator. Replace only the defective part with our replacement gear, made from a much higher quality plastic than OEM. This fixes the problem and saves the cost of a new actuator.

What's in the kit:

• Gear
• Shaft

Reference OE numbers:

• BMW: 27107566296, 27107568267, 27107528559
• Bosch: 0130008507
• Transfer cases: ATC 400, ATC 500, ATC 700
• Other: 8473227771, 8472227771, 093509010

Fits:

Not sure it fits your car? Send us your VIN and we'll check compatibility for you.

Oil Dipstick Audi A4 B6 B7 01-06, A6 C5 C6 01-06, A8 4E 03-06
 
Suitable for the following models:

Audi A4 B6 B7, production year: 2001-2006
Audi A6 C5 C6, production year: 2001-2006
Audi A8 4E, production year: 2003-2006

OEM number:

06C115611K

Engine: 3.0 petrol 218 HP (ASN / BBJ)

Beisan Systems large bolt for BMW Single VANOS

The Beisan Systems large bolt is a replacement part for the BMW single VANOS unit. Genuine product from the American company Beisan Systems. Don't risk cheap copies that barely last 10,000 km, fit poorly and put your car's reliability at risk.

Compatibility

• BMW M50TU
• BMW M52
• BMW S50 (US)
• BMW S52 (US)

Not sure the bolt fits your engine? Send us your VIN and we'll check.