Sport Exhaust System

TurboWorks sports muffler / resonator, 63 mm inlet, 355 mm body, 409SS.

High-quality muffler made of SS409 stainless steel with Hi-Flow technology.

• Maximum exhaust gas flow
• Among the best mufflers on the market
• All dimensions are shown in the gallery image

TurboWorks RS 409SS sports muffler / resonator, 63 mm inlet, 300 mm body.

High-end sports muffler made of 409SS stainless steel.

Dimensions

• Overall length: 410 mm
• Body length: 300 mm
• Body diameter: 122 mm

Lambda / O2 sensor spacer M18x1.5, galvanised

On cars meeting Euro 3 and later standards, the second lambda sensor sits after the catalytic converter and monitors its efficiency. If it detects a deviation, the ECU shows a fault (usually CHECK ENGINE) and, depending on the make, the engine may enter limp mode with a loss of power. This fault can appear, for example, with a sports (high-flow) catalyst.

The spacer moves the sensor out of the main exhaust flow, which helps against this fault. It can also help with LPG systems where a very rich mixture triggers CHECK ENGINE.

Important: removing the catalytic converter on cars driven on public roads is not permitted. The spacer is intended for sports (high-flow) catalysts and for race cars.

Specifications

• Thread: M18x1.5
• Design: straight
• Finish: galvanised

Installation

Unscrew the lambda sensor, screw the spacer into its place, then screw the sensor into the spacer.

TurboWorks titanium exhaust heat wrap 50 mm x 2 mm x 10 m

Ceramic fibre exhaust heat wrap. Reduces heat loss and so reduces power losses.

Specifications

• Width: 50 mm
• Thickness: 2 mm
• Length: 10 m
• Heat resistance up to 1600 °C
• Material: ceramic fibre, titanium colour

TurboWorks RS 409SS resonator / sports muffler, 63 mm inlet, 450 mm body.

High-end sports muffler made of 409SS stainless steel.

Dimensions

• Overall length: 600 mm
• Body length: 450 mm
• Body diameter: 122 mm

TurboWorks V-band clamp with flanges, 76 mm.

• Flange diameter: 3" (76 mm)
• Flanges and clamp in 304 stainless steel
• For turbo and exhaust systems

Universal short lambda / O2 sensor spacer M18x1.5, galvanised

On cars meeting Euro 3 and later standards, the second lambda sensor sits after the catalytic converter and monitors its efficiency. If it detects a deviation, the ECU shows a fault (usually CHECK ENGINE) and, depending on the make, the engine may enter limp mode with a loss of power. This fault can appear, for example, with a sports (high-flow) catalyst.

The spacer moves the sensor out of the main exhaust flow, which helps against this fault. It can also help with LPG systems where a very rich mixture triggers CHECK ENGINE.

Important: removing the catalytic converter on cars driven on public roads is not permitted. The spacer is intended for sports (high-flow) catalysts and for race cars.

Specifications

• Thread: M18x1.5
• Design: short, straight
• Finish: galvanised

Installation

Unscrew the lambda sensor, screw the spacer into its place, then screw the sensor into the spacer.

TurboWorks LT 409SS sports resonator, 76 mm, 355 mm

High-quality SS409 stainless steel resonator built with Hi-Flow technology for maximum exhaust flow and a sporty sound.

Specifications

• Diameter: 76 mm
• Length: 355 mm
• Material: 409SS stainless steel
• Hi-Flow design for optimised exhaust flow
• Weight: 3.5 kg

Benefits

• Sporty sound without excessive drone
• Resistant to corrosion and high temperature
• All dimensions are shown in the gallery images
• One of the best resonators in its class

Questions about fitment? Contact us.

TurboWorks RS 409SS sports muffler / resonator, 76 mm inlet, 300 mm body.

High-end sports muffler made of 409SS stainless steel.

Dimensions

• Overall length: 450 mm
• Body length: 300 mm
• Body diameter: 148 mm

Downpipe BMW E60 535d / E90 335d / E83 X3 / E70 X5 / E63 635d — M57N2 RM Motors

An RM Motors downpipe made entirely of acid-resistant AISI 304 stainless steel. Fits a wide range of BMW models with the M57N2 engine.

Compatible models

• BMW E60 / E61 535d M57N2 — 2005–2009 — 286 hp
• BMW E90 / E91 / E92 335d M57N2 — 2005–2013 — 286 hp
• BMW E83 X3 3.0d M57N2 — 2006–2010 — 286 hp
• BMW E70 X5 3.0sd / 3.5d M57N2 — 2007–2010 — 286 hp
• BMW E63 / E64 635d M57N2 — 2006–2010 — 286 hp

Specifications

• Pipe diameter: 76 mm
• Material: AISI 304 acid-resistant stainless steel
• Engine: M57N2

OEM numbers

• 18308508523
• 18307807474
• 18307796215
• 18308512287
• 18307804112

TurboWorks titanium exhaust heat wrap 50 mm x 2 mm x 15 m

Reduces heat loss from the exhaust system and with it power losses. Ceramic fibre wrap, temperature resistant up to 1600 °C.

Dimensions

• Width: 50 mm
• Thickness: 2 mm
• Length: 15 m

Thermal tape for generation 50mm x 4.5m, gold

Made of fiberglass, coated with a layer of metalized polyamide.Thermal resistance (heat radiation) up to 500 degrees Celsius.Thermal strength (direct contact) up to 250 degrees Celsius.Dimensions:Width: 50 mmLength: 4.5 m

TurboWorks RS 409SS sports muffler, 76 mm, 450 mm body

High-end sports muffler / resonator made of 409SS stainless steel.

Dimensions

• Inlet: 76 mm
• Overall length: 600 mm
• Body length: 450 mm
• Body diameter: 148 mm

Downpipe BMW E90 / E91 318d, 320d – M47N2

• Fits: BMW E90 / E91 318d, 320d (up to 163 hp), M47N2 engine, 2004–2007
• Type: decat downpipe
• Diameter: 63.5 mm
• For cars originally fitted with a Euro 4 catalytic converter

OE numbers

• 18307797294
• 18307797295
• 18307797296

RM Motors sport exhaust tip 101x63 mm, stainless steel

Slanted-cut tip in satin stainless steel, available with or without clamp.

Dimensions

• Inner inlet diameter: 63.5 mm
• Tip diameter: 101 mm
• Overall length: 140 mm
• Tip length: 105 mm

Pneumatic control kit for exhaust cut-out valve with wireless remote

Remote control kit for an exhaust cut-out valve. Press a button on the remote to open or close the valve and switch between a quiet everyday mode and a louder, sportier sound — without stopping the car.

Kit contents

• Pneumatic actuator, 2.3" diameter
• Wireless module and remote control
• Connecting cable

How it works

The wireless module receives the command from the remote and triggers the pneumatic actuator, which is linked to the valve and opens or closes it.

Benefits

• Choose your exhaust sound with one button
• Quiet mode for city driving and long trips
• Sportier sound and freer exhaust flow with the valve open
• Controlled from the cabin, no mechanical cable to the valve

Compatibility

Works with all types of exhaust cut-out valves, including our TurboWorks 63 mm vacuum-open cut-out valve.

Installation

We recommend having it fitted by a workshop. Not sure it suits your valve? Contact us before ordering.

Downpipe Skoda Octavia Mk3 1.6 TDI / 2.0 TDI

Fits Skoda Octavia Mk3 with 1.6 TDI and 2.0 TDI engines from 2013 — 90, 105, 150 and 184 hp. Pipe diameter: 76 mm.

Connections

• Two lambda sensor bungs
• Three threaded ports for temperature sensors
• Two pipes for the pressure sensor hose

Material and warranty

• High-quality stainless steel T304 / AISI 304 / 1.4301 / X5CrNi18-10 / 0H18N9
• Every part made with CNC technology
• 24-month manufacturer warranty

OE numbers

04L131723AR
04L131670GX
04L131606EX
04L131602EX
04L131606NX
04L131648GX
04L131606FX
04L131669KX
04L131670DX
04L131648RX
04L131670BX
04L131669X
04L131678GX
04L131673X
04L131601GX
04L131601HX
04L131601KX
04L131648SX
04L131648HX
04L131671PX
04L131602J
04L131606G
04L131606Q
04L131648
04L131648X
04L131671P

Downpipe BMW F07 F10 F11 525d 530d 535d — RM Motors

An RM Motors downpipe made of high-quality AISI 304 stainless steel, every part CNC-made. For Euro 5 models.

Compatible models

• BMW F07 / F10 / F11 — 525d, 530d, 530d xDrive, 535d, 535d xDrive
• Engines: N57, N57N, N57Z
• Years: 2008–2013
• Power: 204, 245, 258, 299 hp
• Emissions: Euro 5

Specifications

• Pipe diameter: 76 mm
• Connection diameter: 70 mm
• Stainless steel AISI 304 (T304, X5CrNi18-10, 1.4301), CNC-made
• Warranty: 24 months from the manufacturer

Connections

• 1 lambda sensor bung
• 2 threaded ports for temperature sensors
• 1 pipe for the pressure sensor hose

OEM numbers

Vacuum-open exhaust cut-out valve, 63 mm

Exhaust cut-out valve module operated by vacuum. The valve controls the loudness of the exhaust system and is usually fitted right after the catalytic converter.

Specifications

• Diameter: 63 mm
• Actuation: vacuum
• Opens at about 1 bar
• Material: SS304 stainless steel

TurboWorks RS 409SS round sports muffler, 70 mm, 300 mm body

High-end sports muffler / resonator made of 409SS stainless steel.

Dimensions

• Inlet: 70 mm
• Overall length: 450 mm
• Body length: 300 mm
• Body diameter: 140 mm

X-pipe exhaust connector 63 mm, stainless steel

Metal X-pipe connector for building exhaust systems on V engines. It speeds up the exhaust gas flow while balancing the pressure between the cylinder banks. Increases power and torque (manufacturer data).

Specifications

• Type: X-pipe
• Inlet/outlet diameter: 2 × 63 mm
• Material: stainless steel
• Dimensions: see the last photo in the gallery

Not sure which diameter you need? Send us the pipe size of your exhaust and we will help you choose.

X-pipe exhaust connector 57 mm, stainless steel

Metal X-pipe connector for building exhaust systems on V engines. It speeds up the exhaust gas flow while balancing the pressure between the cylinder banks. Increases power and torque (manufacturer data).

Specifications

• Type: X-pipe
• Inlet/outlet diameter: 2 × 57 mm
• Material: stainless steel
• Dimensions: see the last photo in the gallery

Not sure which diameter you need? Send us the pipe size of your exhaust and we will help you choose.

Downpipe for Audi A3 8V 1.6 TDI and 2.0 TDI

A sports downpipe for the Audi A3 8V with 1.6 TDI and 2.0 TDI diesel engines from 2013. Diameter 63.5 mm, made from high-quality stainless steel.

Compatibility

Audi A3 8V:

• 1.6 TDI – 105 hp
• 2.0 TDI – 150 hp
• 2.0 TDI – 184 hp
• models from 2013

Features

• Pipe diameter: 63.5 mm
• Two lambda sensor bungs
• Three threaded ports for temperature sensors
• Two pipes for the pressure sensor hose
• Stainless steel T304 / AISI 304 / 1.4301 / X5CrNi18-10 / 0H18N9
• Every part made with CNC technology
• 24-month manufacturer warranty

What is a downpipe?

The downpipe is the part of the exhaust directly after the turbocharger. In tuning it lets exhaust gases flow more freely and is used as part of a modified sports exhaust system.

OE numbers for Audi A3 8V

The product is intended for applications using the following OE / OEM numbers:

04L131723AR
04L131670GX
04L131606EX
04L131602EX
04L131606NX
04L131648GX
04L131606FX
04L131669KX
04L131670DX
04L131648RX
04L131670BX
04L131669X
04L131678GX
04L131673X
04L131601GX
04L131601HX
04L131601KX
04L131648SX
04L131648HX
04L131671PX
04L131602J
04L131606G
04L131606Q
04L131648
04L131648X
04L131671P

How to check fitment

Before ordering, check the engine, power output and exact version of your Audi A3 8V. The OE number of the original part can also be used to confirm fitment.

If in doubt, contact SelectParts.BG and we will check fitment before you order.

Downpipe BMW F07 F10 F11 530d 535d — RM Motors

An RM Motors downpipe made of high-quality AISI 304 stainless steel, every part CNC-made. For Euro 6 models with AdBlue.

Compatible models

• BMW F07 / F10 / F11 — 530d, 530d xDrive, 535d, 535d xDrive
• Engines: N57N, N57Z
• Years: 2011–2017
• Power: 258, 313 hp

Specifications

• Pipe diameter: 76 mm
• Connection diameter: 70 mm
• Stainless steel AISI 304 (T304, X5CrNi18-10, 1.4301), CNC-made
• Emissions: Euro 6 + AdBlue
• Warranty: 24 months from the manufacturer

Connections

• 2 lambda sensor bungs
• 2 threaded ports for temperature sensors
• 1 pipe for the pressure sensor hose

OEM numbers

• 18308513526
• 18308513528
• 18308516088
• 18308576331
• 18308571006
• 18308515094

Downpipe BMW E90 / E60 2.5d, 3.0d M57N2 — RM Motors

Compatible models

• BMW E90 / E91 / E92 / E93 325d, 330d, 197–231 hp, 2004–2009
• BMW E60 / E61 525d, 530d, 197 / 231 / 235 hp, 2005–2010

Specifications

• Pipe diameter: 76 mm
• Connection diameter (nipple): 61 mm
• Made entirely of acid-resistant stainless steel, CNC-made

Downpipe BMW E87 118d, 120d – M47N2, 61 mm

• Fits: BMW E87 118d, 120d with M47N2 engine, 2003–2007
• Also fits: BMW E90 / E91 318d, 320d M47N2, 2004–2007 (163 hp)
• Made entirely of acid-resistant stainless steel

Important: a 55 mm connecting pipe is recommended for Euro 3 models, and a 61 mm connecting pipe for Euro 4 DPF models. This version has a 61 mm connection.

V-Band clamp with flanges 89mm - TurboWorks.

Flange diameter: 3.5" (89 mm)
 
Flange and clamp made of 304 stainless steel.
 
For use in turbo and exhaust systems.