BMW Performance & Tuning Parts

BMW M52TU DISA Valve Repair Kit – Aluminium

The BMW M52TU DISA valve repair kit in aluminium is top quality and made in Germany. It is precision-milled and supplied with all the parts needed for assembly. The kit fits ALL M52TU engines.

For genuine BMW DISA units only!

Specifications:

• Material: aluminium, precision-milled
• Made in: Germany
• OEM number of the DISA unit: 11611440049

What's in the kit:

• DISA flap
• Lever
• High-strength threaded shaft
• Spring washer for the threaded shaft
• Lock washer
• O-ring

Fits:

• All BMW M52TU engines

Not sure it fits your car? Send us your VIN and we'll check compatibility for you.

BMW X3 X5 X6 xDrive Transfer Case Actuator Gear

The xDrive transfer case actuator gear in your BMW wears out over time. Do you have a problem with the brakes, ABS and 4x4? Are all the warning lights on? This is a common cause of those symptoms.

An actuator motor is attached to the transfer case, and inside it is a low-quality plastic gear driven by a metal worm gear. Over time the nylon wears and strips, and the gear stops turning. BMW does not supply this part separately – it sells a complete new motor at a high price, which will fail again because of the same nylon gear.

Replace only the defective nylon gear with our replacement gear, made from a much higher quality plastic than OEM. This fixes the problem and saves the cost of a new actuator.

What's included:

• 1 x gear

Reference OE numbers:

• BMW: 27107566296, 27107568267, 27107528559
• Bosch: 0130008507
• Transfer cases: ATC 400, ATC 500, ATC 700
• Other: 8473227771, 8472227771, 093509010

Fits:

Not sure it fits your car? Send us your VIN and we'll check compatibility for you.

Swirl flap blanking plug BMW N57X 3.0 – M50d, M550d, 750d – Tafmet

Tafmet blanking plug for removing the swirl flaps on BMW N57X 3.0d engines – M550d, 750d, X5 M50d and X6 M50d.

Specifications

• Engines: N57X
• Manufacturer code: Z_KOL_N57X
• Brand: Tafmet Poland

Not suitable for M57, N57, N57N, N57Z and B57.

Not sure it fits your car? Send us your VIN and we will check.

Turbo-downpipe flange for BMW F6 (M57)


Compatible with:

BMW E39 525d, 530d M57

Turbo-downpipe flange for BMW F11 (M57N2)
 
 
Compatible with:
 
BMW E90, E91, E92, E93 325d, 330d, 330xd M57N2BMW E60, E61 525d, 530d, 530xd M57N2BMW E83 X3 30d M57N2BMW E71 X6 30d M57N2BMW E70 X5 30d M57N2

Stainless steel sport exhaust manifold for BMW E90 E91 325i and 330i

This sport exhaust manifold replaces the stock one and improves exhaust flow from the engine. The manufacturer claims up to 10% more power.

Specifications

• Model: BMW E90, E91 325i, 330i
• Material: stainless steel (100%)
• Outlet: 50 mm
• Cylinder head port: 36 mm
• Included: gasket set

Not sure it fits your car? Send us your VIN and we will check compatibility before you order.

TurboWorks Intercooler BMW F20 F22 F30 F32 N55

The TurboWorks intercooler for BMW F20 F22 F30 F32 N55 (Gasoline 120/140mm) is a direct-fit upgrade for the make and models listed below. It is carefully and precisely built with TIG welds from T-6061 aluminium.

Core dimensions:

• Width: 510 mm
• Height: 150/210 mm
• Thickness: 90/130 mm
• Outlets: 62–70 mm
• Rated for: 200–550 hp

TurboWorks intercoolers are among the few tested at over 10 bar.

They use an efficient COOL-TEC+ core with polished aluminium walls of the highest quality. Other cores have more sparsely spaced fins, which cool poorly, while COOL-TEC+ cores use finer fins for a clearly better cooling performance.

Fits:

Not sure it fits your car? Send us your VIN and we'll check compatibility for you.

TurboWorks performance intercooler BMW F01 F06 F07 F10 F11 F12

Direct-fit replacement for the stock intercooler. Carefully built with TIG welds from T-6061 aluminium.

Compatible models

Core dimensions

• Width: 560 mm
• Height: 210 / 305 mm
• Thickness: 40 / 90 mm
• Outlets: 62–70 mm

COOL-TEC+ core

Our intercoolers are among the few pressure tested above 10 bar. TurboWorks uses the efficient COOL-TEC+ core and high-quality polished aluminium end tanks. Cores with sparser fins cool poorly, while COOL-TEC+ cores use a finer fin pitch for a clear improvement in cooling.

TurboWorks direct-fit intercooler BMW M47 120d, 123d, 320d

TurboWorks intercoolers offer excellent airflow, durability and cooling. They are a direct upgrade over the stock intercooler and help the engine make more power. Our intercoolers are among the few pressure tested above 10 bar.

Compatible models

• BMW E81 / E82 / E87 / E88 120d
• BMW E90 / E91 / E92 / E93 320d

Main dimensions

• Width: 510 mm
• Height: 150 / 210 mm
• Thickness: 80 / 120 mm
• Outlet diameter: 73 / 82 mm

Delivers more than 50% more airflow than the stock intercooler.

TurboWorks intercooler for BMW X5 / X6 E70, E71, F15, F16

Compatible models

• BMW X5 E70 3.0d / 3.0sd (2006–2010)
• BMW X5 E70 LCI 30dX / 35dX / 35iX / 40dX / 40iX (2009–2013)
• BMW X6 E71 30dX / 35dX / 35iX / 40dX / 40iX (2007–2014)
• BMW X5 F15 25d / 25dX / 28iX / 30dX / 35dX / 35i / 35iX / 40dX / 40eX (2012–2018)
• BMW X6 F16 28iX / 30dX / 35i / 35iX / 40dX (2013–2018)

Built with great care and precision, with TIG-welded parts in T-6061 aluminium. Tested above 10 bar.

Core dimensions

• Width: 510 mm
• Height: 335 / 160 mm
• Thickness: 150 / 70 mm

TurboWorks intercoolers use an efficient COOL-TEC+ core with top-quality polished aluminium end tanks. Other cores have more widely spaced fins and cool poorly, while COOL-TEC+ uses finer fins for noticeably better cooling.

DeatschWerks DW200 fuel pump, 255 lph, with install kit

DeatschWerks DW200 series fuel pump flowing 255 litres per hour, supplied with an install kit. The pump is universal, and is an especially good fit for the BMW E36 and E46 models listed below.

Features

• Manufacturer: DeatschWerks (DW)
• Series: DW200
• Flow: 255 lph
• Includes: install kit

Especially suitable for

EGR Delete + Cooler Race Pipe BMW B47 2.0d

Complete kit for removing the EGR valve and the EGR cooler on BMW B47 2.0d engines.

Compatibility by model

BMW 1 Series:

• F20/F21 LCI — 118d, 118dX, 120d, 120dX, 125d B47

BMW 2 Series:

• F22 — 218d, 220d, 220dX, 225d B47
• F23 — 218d, 220d, 225d B47

BMW 3 Series:

• F30/F31 — 316d B47
• F30/F31 LCI — 316d, 318d, 318dX, 320d, 320d ed, 320dX, 325d B47
• F34 — 318d, 320d, 320dX B47

BMW 4 Series:

• F32 — 418d, 420d, 420dX, 425d B47
• F33 — 420d, 425d B47
• F36 — 418d, 420d, 420dX, 425d B47

BMW 5 Series:

• F10/F11 LCI — 518d, 520d, 520dX B47

BMW 7 Series:

• G11 — 725d B47
• G12 — 725Ld B47

BMW X3 / X4:

• X3 F25 — X3 18d, X3 20dX B47
• X4 F26 — X4 20dX, X4 25dX B47

EGR Delete / Race Pipe BMW M47N2 / M57N2

Kit contents

• 1 x EGR replacement — stainless steel, Ø54mm, length 80mm
• 1 x Flange gasket
• 4 x Flange screw with washer
• 1 x O-ring seal

Compatibility by model

BMW 1 Series E87 (02.2003–02.2007):

• 118d M47N2, 120d M47N2

BMW 3 Series E90/E91 (02.2004–08.2008):

• 318d/320d M47N2; 325d/330d/330xd/335d M57N2

BMW 3 Series E90/E91 LCI (03.2008–05.2012):

• 325d/335d M57N2

BMW 3 Series E92 (05.2005–03.2013):

• 325d/330d/330xd/335d M57N2

BMW 3 Series E93 (09.2005–02.2010):

• 325d/330d M57N2

BMW 5 Series E60/E61 (02.2002–02.2007):

• 520d M47N2; 525d/530d/530xd/535d M57N/M57N2

BMW 5 Series E60/E61 LCI (10.2005–05.2010):

• 520d M47N2; 525d/525xd/530d/530xd/535d M57N2

BMW 6 Series E63/E64 LCI (04.2006–07.2010):

• 635d M57N2

BMW 7 Series E65/E66 (07.2004–07.2008):

• 730d M57N2, 730Ld M57N2

BMW X3 E83 / E83 LCI (05.2003–08.2010):

• 2.0d M47N2; 3.0d/3.0sd M57N2

BMW X5 E53 / E70 (01.2003–03.2010):

• E53 3.0d M57N; E70 3.0d/3.0sd M57N2

BMW X6 E71 (09.2007–03.2010):

• 30dX/35dX M57N2

OEM EGR valve numbers

• Pierburg: 70045000, 70045002, 70045009
• BMW: 11717804382, 11717793484, 11717804380, 11717804352
• Era: 555266

Suitable for the following models:

323Ti Touring 99-00
323i/323is/ Ci 99-00
325i/325Ci/325Ci Conv.
325Ti Touring/323iC 2001-2005
328i 1999-2002
328Ci 1999-2000
330Ci/330i/330Ci 2001-2005
Z4 E85
2.0i 2.2i 2.5i 3.0i 2003-2013
NOT for XI  or M3

Downpipe BMW F10 LCI / F11 LCI / F07 GT LCI – AdBlue (SCR)

Съвместимост:

• BMW 530d x / 535d x

• Двигатели: N57N, N57Z

• Години на производство: 2012–2017 г.

• Мощност: 245, 258, 299, 313 к.с.

• Задвижване: xDrive

Специална версия за автомобили с EURO 6 и AdBlue (SCR)

Този downpipe е предназначен за автомобили, оборудвани с EURO 6 катализатор със SCR система и AdBlue. Конструкцията разполага със специфичните отвори и връзки за датчиците и компонентите на SCR системата, необходими за съвместимост с оригиналната конфигурация на автомобила.

Технически характеристики:

• Диаметър на тръбата: 76 мм

• Материал: висококачествена неръждаема стомана T304

• Прецизна CNC изработка на отделните компоненти

• 24 месеца гаранция от производителя

Изводи и връзки:

• 2 отвора за ламбда сонди

• 2 резбови отвора за температурни датчици

• 2 щуцера за маркучите на датчика за налягане

• 1 гнездо за датчика на AdBlue системата

• 1 гнездо за SCR модула

Материал: Неръждаема стомана T304 (X5CrNi18-10 / 1.4301 / AISI 304 / 0H18N9).

Оригинален номер (OE): 18308514746

EGR Delete Kit for BMW B57 3.0d Engines

This EGR delete kit for BMW B57 engines mechanically blanks off the exhaust gas recirculation (EGR) system on BMW B57, B57O and B57T diesels.

It includes the blanking plates, gaskets, cooling system caps and plugs needed to seal the ports once the EGR valve and EGR cooler are removed or isolated.

It fits the BMW 3, 5, 6 GT, 7 and 8 Series, X3, X4, X5, X6 and X7 versions listed below. Check your engine and BMW type code to choose correctly.

What's in the Kit

• Exhaust manifold blanking plate with gasket – stainless steel
• Intake manifold blanking plate with gasket – stainless steel
• Cooling system caps for the front EGR cooler and the low-pressure EGR cooler
• Blanking plate for the DPF port – stainless steel
• Intake plug with mounting bracket – aluminium and FPM

BMW Compatibility

Open a series to see the compatible models, engines and BMW type codes.

OE Reference Numbers

11718574815, 11718599832, 11618471742, 11718574816, 11538576288

Note: These numbers are for reference and fitment only. They do not mean the kit is a genuine BMW part.

Before Fitting

Once the EGR valve is removed or blanked, the ECU may log a missing signal or system fault and switch on a warning light. An ECU software adaptation by a qualified tuner is usually needed for correct operation.

Not sure it fits? Send us your car's VIN and we will check compatibility before you order.

DBA Brake Discs Street Series - T2 for BMW F20 - DBA2282S

• Brand: DBA
• OEM number: DBA2282S
• Compatibility: BMW F20
• Diameter [mm]: 300
• Vented disc: Yes
• Number of holes: 5
• Inner diameter [mm]: 79
• Thickness [mm]: 22
• Height [mm]: 73

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - En-Shield - plain for BMW F10 - DBA2672E

• Brand: DBA
• OEM number: DBA2672E
• Compatibility: BMW F10
• Diameter [mm]: 330
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 75
• Minimum thickness [mm]: 22.4
• Thickness [mm]: 24
• Height [mm]: 66
• Pitch circle [mm]: 120
• ECE R90 number: E11*90R02/06*59758*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - T2 for BMW F10 - DBA2672S

• Brand: DBA
• OEM number: DBA2672S
• Compatibility: BMW F10
• Diameter [mm]: 330
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 75
• Thickness [mm]: 24
• Height [mm]: 66
• Pitch circle [mm]: 120
• ECE R90 number: E11*90R02/06*60531*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - T2 for BMW F10 - DBA2673S

• Brand: DBA
• OEM number: DBA2673S
• Compatibility: BMW F10
• Diameter [mm]: 330
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 75
• Minimum thickness [mm]: 18.4
• Thickness [mm]: 20
• Height [mm]: 68.8
• Pitch circle [mm]: 120
• ECE R90 number: E11*90R02/06*60522*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - En-Shield - plain for BMW F10 - DBA2674E

• Brand: DBA
• OEM number: DBA2674E
• Compatibility: BMW F10
• Diameter [mm]: 348
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 75
• Minimum thickness [mm]: 28.4
• Thickness [mm]: 30
• Height [mm]: 66
• Pitch circle [mm]: 120
• ECE R90 number: E11*90R02/06*59756*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - T2 for BMW F10 - DBA2674S

• Brand: DBA
• OEM number: DBA2674S
• Compatibility: BMW F10
• Diameter [mm]: 348
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 75
• Minimum thickness [mm]: 28.4
• Thickness [mm]: 30
• Height [mm]: 66
• Pitch circle [mm]: 120
• ECE R90 number: E11*90R02/06*60527*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - En-Shield - plain for BMW F20 - DBA2676E

• Brand: DBA
• OEM number: DBA2676E
• Compatibility: BMW F20
• Diameter [mm]: 340
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 79.00
• Minimum thickness [mm]: 28.4
• Thickness [mm]: 30
• Height [mm]: 73.20
• ECE R90 number: E11*90R02/06*59746*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - T2 for BMW F20 - DBA2676S

• Brand: DBA
• OEM number: DBA2676S
• Compatibility: BMW F20
• Diameter [mm]: 340
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 79.00
• Minimum thickness [mm]: 28.4
• Thickness [mm]: 30
• Height [mm]: 73.20
• ECE R90 number: E11*90R02/06*60512*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - En-Shield - plain for BMW F20 - DBA2677E

• Brand: DBA
• OEM number: DBA2677E
• Compatibility: BMW F20
• Diameter [mm]: 345
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 75.00
• Minimum thickness [mm]: 22.4
• Thickness [mm]: 24
• Height [mm]: 66.10

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - T2 for BMW F20 - DBA2677S

• Brand: DBA
• OEM number: DBA2677S
• Compatibility: BMW F20
• Diameter [mm]: 345
• Vent type: Kangaroo Paw
• Number of holes: 5
• Inner diameter [mm]: 75.00
• Minimum thickness [mm]: 22.4
• Thickness [mm]: 24
• Height [mm]: 66.10

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - plain for BMW E39 - DBA2854

• Brand: DBA
• OEM number: DBA2854
• Compatibility: BMW E39
• Diameter [mm]: 324
• Vented disc: Yes
• Number of holes: 5
• Inner diameter [mm]: 79
• Minimum thickness [mm]: 28.4
• Thickness [mm]: 30
• Height [mm]: 73.5
• Pitch circle [mm]: 120
• ECE R90 number: E11*90R02/06*59760*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - plain for BMW E46 - DBA2855

• Brand: DBA
• OEM number: DBA2855
• Compatibility: BMW E46
• Diameter [mm]: 325
• Vented disc: Yes
• Number of holes: 5
• Inner diameter [mm]: 79
• Minimum thickness [mm]: 23.4
• Thickness [mm]: 25
• Height [mm]: 52
• ECE R90 number: E11*90R02/06*59754*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - T2 for BMW E46 - DBA2855S

• Brand: DBA
• OEM number: DBA2855S
• Compatibility: BMW E46
• Diameter [mm]: 325
• Vented disc: Yes
• Number of holes: 5
• Inner diameter [mm]: 79
• Minimum thickness [mm]: 23.4
• Thickness [mm]: 25
• Height [mm]: 52
• ECE R90 number: E11*90R02/06*60523*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us

DBA Brake Discs Street Series - plain for BMW E46 - DBA2856

• Brand: DBA
• OEM number: DBA2856
• Compatibility: BMW E46
• Diameter [mm]: 320
• Vented disc: Yes
• Number of holes: 5
• Inner diameter [mm]: 75
• Minimum thickness [mm]: 20.4
• Thickness [mm]: 22
• Height [mm]: 60.8
• Pitch circle [mm]: 120
• ECE R90 number: E11*90R02/06*59754*00

Delivery time - up to 14 working days

If you can't find the right discs for your car, please contact us