Turbo Works

Titanium heat blanket for T25/T28 turbocharger.
The blanket is designed to lower the temperature under the car's hood by thermally insulating the turbo. The heat from the turbocharger is contained within the system, which increases the temperature of the exhaust gases and accelerates their exit. The retained heat also has a positive effect on the temperature of cooling components, such as the intercooler or oil cooler. Thermal resistance up to 1400 C. The set includes a blanket and springs to secure the blanket to the turbo. The inner layer is further reinforced with a stainless steel mesh.

V-Band Clamp with Flanges 63mm - TurboWorks.

Flange diameter: 2.5" (63 mm)
 
Flange and clamp made of 304 stainless steel.
 
For use in turbo and exhaust systems.

Dimensions:
 
Inner diameter: 63 mm
Outer diameter (welding side): 71 mm
Outer diameter (band side): 82 mm

V-Band Clamp 102mm - TurboWorks.
 
Flange diameter: 4" 102mm
Flange and clamp made of 304 stainless steel.
For use in turbo and exhaust systems.

V-Band Clamp 76mm Pro - TurboWorks.

Flange diameter: 3" (76 mm)
 
 
304 stainless steel flange and clamp.
For use in turbo and exhaust systems.
 
The new design allows for quick removal of the clamp.

V-Band Clamp with Flanges 102mm - TurboWorks.

Flange Diameter: 4" (102mm)
 
Flange and clamp made of 304 stainless steel.
 
For use in turbo and exhaust systems.

70mm V-Band Clamp - TurboWorks.
 
V-Band clamp for connecting exhaust system components.
 
Ensures a tight connection and facilitates the removal of system components.

Vacuum Operated Cut Off Valve for exhaust, 76mm.
 
The exhaust valve throttle controls the sound volume of the exhaust system.
The device is typically mounted just behind the catalytic converter, while the exhaust gas flow is controlled by an electronically actuated throttle valve.

The set contains:
 
3-inch pneumatic throttle valve
Wireless module and remote control
Connecting cable

Electric Cut Off Valve for generation, 63mm.
 
The exhaust valve throttle controls the volume of the exhaust system.
The device is usually mounted directly behind the catalytic converter, while the exhaust gas flow is controlled by an electronically operated throttle valve.
Material: Aluminum
 
The module can only operate in a fully open or fully closed position.
 
Operation in intermediate positions is not allowed.

Sport muffler resonator 70mm L355mm TurboWorks RS 409SS.
T-shaped.
High-quality muffler made of stainless steel using Hi-Flow technology.

Sport muffler resonator 76mm L355mm TurboWorks RS 304SS.
T-shaped.
High-quality muffler made of stainless steel using Hi-Flow technology.

TurboWorks RS 304SS 70mm L355mm Resonator Exhaust Muffler.

High-quality muffler made of 304SS stainless steel using Hi-Flow technology.
 
Provides maximum exhaust gas flow.
 
Among the best mufflers on the market.
 
All dimensions of the muffler are given in the image in the gallery.

Sports resonator muffler 57mm L355mm TurboWorks RS 409SS.

High-quality muffler made of SS409 stainless steel using Hi-Flow technology.
 
Provides maximum exhaust gas flow.
 
Some of the best mufflers on the market.
 
All muffler dimensions are given in the gallery image.

Sports exhaust resonator 76mm L355mm TurboWorks RS 409SS.

High-quality SS409 stainless steel muffler using Hi-FlowY technology.
 
Mufflers made with Hi-FlowY technology combine Hi-Flow and a Y-pipe, thus providing maximum power increase and good sound attenuation.
 
They ensure maximum exhaust gas flow.

TurboWorks RS 304SS 405mm φ 63.5mm Sports Resonator Exhaust
 
High-quality sports exhaust made of 304SS stainless steel.
Dimensions:
 
overall length: 405 mm
installation diameter: 63 mm
overall diameter: 85 mm

Turbo-downpipe flange for BMW F6 (M57)


Compatible with:

BMW E39 525d, 530d M57

Turbo-downpipe flange for BMW F11 (M57N2)
 
 
Compatible with:
 
BMW E90, E91, E92, E93 325d, 330d, 330xd M57N2BMW E60, E61 525d, 530d, 530xd M57N2BMW E83 X3 30d M57N2BMW E71 X6 30d M57N2BMW E70 X5 30d M57N2

Tuning Front Mount Intercooler 600x300x76, inlet 76mm - TurboWorks, black.
TurboWorks front mount intercoolers have excellent airflow. We guarantee very good durability and excellent cooling. They perfectly replace stock intercoolers, increasing vehicle performance. Our intercoolers are among the few that have been tested above 10 bar. Intercooler dimensions: 780x300x76 mm Core dimensions: 600x300x76mm Inlet outer diameter: 3"(76mm) Suitable for front mounting in any tuning project. TurboWorks intercoolers have an efficient COOL-TEC+ core, walls made of the highest quality aluminum. Other cores have finer fins, which results in poor cooling, while COOL-TEC+ cores are made of denser fins, which ensures a significant improvement in cooling. All orders for tuning intercoolers placed by 5:00 PM are fulfilled on the same day. For the city of Sofia, we at SelectParts.BG also offer personal delivery for your convenience.

Intercooler 550x180x65, inlet 57mm - TurboWorks
 
TurboWorks front-mount intercoolers have excellent airflow.
We guarantee the highest durability and excellent cooling.
They feature the most efficient COOL-TEC+ core on the market, with end tanks made of the highest quality polished aluminum.
 
COOL-TEC+ is an improved version of the Bar & Plate core. It has staggered internal fins, but their density is chosen so as not to cause turbulence and not reduce the clearance. Additionally, the arrangement of the fins forces air to flow across the entire cooling surface. By combining these elements, we achieve very high thermal efficiency while maintaining a low drag coefficient and high performance.
Our intercoolers are among the few that have been tested above 10 bar.
In the picture below, you can see how the new COOL-TEC+ core is constructed.
 
Overall intercooler dimensions: 700x180x65mm
Core dimensions: 550x180x65mm
Outer diameter of inlet/outlet: 2.25" (57 mm)
 
An intercooler with an inlet/outlet diameter of 2.5" (63 mm) is also available.

Intercooler 450x230x65, inlet 63mm - TurboWorks

TurboWorks intercoolers have excellent airflow. We guarantee the highest durability and excellent cooling. They feature the most efficient COOL-TEC + core on the market - walls made of the highest quality polished aluminum. COOL-TEC + is an improved version of the Bar & Plate core. It has staggered internal fins, but their density is chosen so as not to cause turbulence and not reduce its clearance. In addition, the arrangement of the fins forces the air to pass through the entire cooling surface. By combining these elements, we achieve very high thermal efficiency while maintaining a low drag coefficient and high performance. Our intercoolers are among the few that have been tested at over 10 bar. Inlet diameter: 2.5 "(63mm) Overall size: 600x230x65mm Core size: 450x230x65mm Other cores have finer fins, resulting in poor cooling, while COOL-TEC + cores are made of denser fins, ensuring a significant improvement in cooling.

All orders for tuning intercoolers placed by 5:00 PM are fulfilled on the same day. For the territory of Sofia, we at SelectParts.BG also offer personal pickup for your convenience.

Intercooler 300x280x76, inlet 76mm - TurboWorks, single-sided
 
TurboWorks front-mount intercoolers have excellent airflow. We guarantee very good durability and excellent cooling. They perfectly replace stock intercoolers, increasing car performance.
Our intercoolers are among the few that have been tested at over 10 bar.
Inlet outer diameter: 3" (76 mm)
TurboWorks intercoolers have an efficient COOL-TEC+ core and polished high-quality aluminum walls.
Other cores have finer fins, which leads to poor cooling, while COOL-TEC+ cores are made of denser fins, ensuring a significant improvement in cooling.

Front mount tuning intercooler 600x300x100, inlet 76mm - TurboWorks
 
TurboWorks front mount intercoolers have excellent airflow. We guarantee very good durability and excellent cooling. They perfectly replace stock intercoolers, increasing vehicle performance.
Our intercoolers are one of the few that have been tested at over 10 bar.
Intercooler dimensions: 780x300x100 mm
Core dimensions: 600x300x100mm
Inlet outer diameter: 3" (inches)
TurboWorks intercoolers have an efficient COOL-TEC + core, and walls made of the highest quality polished aluminum.
Other cores have finer fins, which leads to poor cooling, while COOL-TEC + cores are made of denser fins, which guarantees a significant improvement in cooling.
 
All orders for tuning intercoolers placed by 5:00 PM are fulfilled on the same day. For the territory of Sofia, we at SelectParts.BG also offer personal delivery for your convenience.

Reversed intercooler 600x300x102, inlet 76mm - TurboWorks
TurboWorks front-mount intercoolers have excellent airflow. We guarantee the highest durability and excellent cooling. They feature the most efficient COOL-TEC + core on the market - walls made of the highest quality polished aluminum. COOL-TEC + is an improved version of the Bar & Plate core. It has staggered internal fins, but their density is chosen so as not to cause turbulence and not to reduce its clearance. In addition, the arrangement of the fins forces the air to pass through the entire cooling surface. By combining these elements, we achieve very high thermal efficiency, while maintaining a low drag coefficient and high performance. Our intercoolers are among the few that have been tested at over 10 bar. Inlet diameter: 76 mm Other cores have finer fins, resulting in poor cooling, while COOL-TEC + cores are made of denser fins, which significantly improves cooling.

Intercooler 600x400x120, inlet 100mm - TurboWorks
 
TurboWorks front-mount intercoolers have excellent airflow. We guarantee the highest durability and excellent cooling. They feature the most efficient COOL-TEC+ core on the market – walls made of the highest quality polished aluminum. COOL-TEC+ is an improved version of the Bar & Plate core. It has staggered internal fins, but their density is chosen so as not to cause turbulence and not reduce its clearance. In addition, the arrangement of the fins forces air to pass through the entire cooling surface. By combining these elements, we achieve very high thermal efficiency while maintaining a low drag coefficient and high performance. Our intercoolers are among the few that have been tested at over 10 bar. Overall dimensions: 780x400x120mm Core: 600x400x120mm Inlet diameter: 10.16 cm Other cores have finer fins, which leads to poor cooling, while COOL-TEC+ cores are made of denser fins, which guarantees a significant improvement in cooling.

Turbo Works B08 hydraulic handbrake, long
 
The handbrake has a very robust, powder-coated construction. The kit includes the components shown in the pictures below: handbrake with 42 cm lever; master cylinder. The master cylinder has connections: inlet - AN4 - 7/16" outlet - AN3 - 3/8"

Turbo Works B05 Hydraulic Handbrake
 
The handbrake has a very durable, powder-coated construction.Lever length - 33cm.The set includes the elements shown in the pictures below:handbrake,master cylinder.The master cylinder has connections:inlet - AN4 - 7/16"outlet - AN3 - 3/8"

Tuning fuel pump TurboWorks 300LHP with installation kit
 
It can work independently or in series with an internal pump.
Designed for 750 horsepower for naturally aspirated engines and 650 horsepower for turbocharged engines.
OEM: 0580 254 044
Operating pressure 6.5 bar.
Dimensions:

Length: 196 mm
Diameter: 60 mm
Inlet: M18x1.5
Outlet: M12x1.5

Color: Silver

External wastegate valve with a 38mm piston diameter - 2.5 bar
There is also an option for water cooling. The product is characterized by very careful and solid workmanship, which allows it to be used in powerful cars with turbochargers without an integrated WasteGate. The kit includes all the flanges and connections necessary for installation.

External WastGate valve with 38 mm piston diameter. The product is characterized by very careful and solid workmanship, which allows its use in powerful turbocharged cars without a built-in gate. The kit includes all the flanges and connectors necessary for installation.

Blow-off adapter for VAG 2.0T FSI BWA
 
Designed to fit perfectly in place of the factory bypass valve.
 
The adapter is compatible with BOSCH valves.
 
Allows excess air to vent to the atmosphere with a clearly audible sound.
 
The adapter can be used not only on vehicles equipped with OEM solenoid valve part number 06 F 145 710 D, but will also fit earlier engine models such as the 2.0 FSI, older 2.0 TFSi, and 5-cylinder TTRS.
 
Not suitable for 2014+ models
 
Dimensions:
 
Height: 45 mm
Top diameter: 30 mm
Diameter at the central part: 35 mm
Diameter of the opening at the bottom: 35 mm
Distance between screws: 47 mm

Balanced in Europe on a high-quality CAB machine.
 
An individual approach to each turbine guarantees high performance and reliability.
 
Top-quality Japanese bearings ensure excellent spool-up and high pressure.
 
Specification:

Compressor wheel: 44.6/60mm
Turbine wheel: 53.8/47mm
Manifold flange: T25
Downpipe flange: 5-Bolt
Compressor inlet diameter: 76mm
Compressor outlet diameter: 51mm
A/R: 0.64

Delivery: 5 to 10 business days!