Turbo Works

Vacuum exhaust cutout valve 76 mm (3") with remote control

Vacuum-operated exhaust cutout valve, 76 mm diameter, normally open – at rest (without vacuum) the valve stays open. The valve controls the sound level of the exhaust system. It is usually installed right after the catalytic converter, and opening/closing is controlled remotely.

Kit contents

• Valve: 3" (76 mm) pneumatic butterfly valve
• Control: wireless module and remote
• Wiring: connecting cable

Not sure the diameter fits your exhaust? Send us your make, model and VIN and we will check.

Electric exhaust cutout valve 63 mm

Electric exhaust cutout valve, 63 mm diameter. The valve controls the sound level of the exhaust system. It is usually installed right after the catalytic converter, and the exhaust flow is controlled by an electrically driven butterfly valve.

Specifications

• Diameter: 63 mm
• Actuation: electric
• Material: aluminium
• Operating positions: fully open or fully closed only – intermediate positions are not allowed

Not sure the diameter fits your exhaust? Send us your make, model and VIN and we will check.

Electric exhaust cutout valve 76 mm

Electric exhaust cutout valve, 76 mm diameter. The valve controls the sound level of the exhaust system. It is usually installed right after the catalytic converter, and the exhaust flow is controlled by an electrically driven butterfly valve.

Specifications

• Diameter: 76 mm
• Actuation: electric
• Material: aluminium
• Operating positions: fully open or fully closed only – intermediate positions are not allowed

Not sure the diameter fits your exhaust? Send us your make, model and VIN and we will check.

TurboWorks vacuum exhaust cutout valve 76 mm, normally open

Vacuum-actuated exhaust cutout (cut-off) valve module. The valve controls the volume of the exhaust system and is usually fitted directly after the catalytic converter.

Features

• Diameter: 76 mm
• Version: supplied in the open position
• Actuation: vacuum
• Opens at approx. 1 bar
• Material: SS304 stainless steel

Twin-pipe sport muffler 76 mm, L 355 mm, 409SS – TurboWorks

TurboWorks twin-pipe sport muffler (resonator) made of 409SS stainless steel, with one inlet and two 76 mm outlets. It is built with Hi-FlowY technology, which combines Hi-Flow with a Y-pipe for maximum exhaust gas flow and good sound damping.

Specifications

• Inlet diameter: 76 mm
• Outlet diameter: 2 x 76 mm
• Box length: 355 mm
• Design: twin pipe: 1 inlet and 2 outlets, Y-pipe
• Material: 409SS stainless steel
• Technology: Hi-FlowY
• Brand: TurboWorks

Not sure which size you need? Contact us and we will help you choose.

TurboWorks RS 304SS round sports muffler, 77 mm, 300 mm body

High-grade round sports muffler / resonator made of 304SS stainless steel, for custom exhaust systems.

Dimensions

• Inlet: 77 mm
• Overall length: 450 mm
• Body length: 300 mm
• Body diameter: 145 mm

TurboWorks RS 304SS sports muffler, 89 mm, L300 mm

High-quality sports muffler (resonator) made of 304 stainless steel. Round body.

Features

• Pipe diameter: 89 mm
• Length: 300 mm
• Shape: round
• Material: 304 stainless steel
• Series: TurboWorks RS

Detailed dimensions are shown in the last product photo.

TurboWorks front mount intercooler 550x180x65, 63 mm inlet, grey

TurboWorks front mount intercoolers offer excellent airflow, durability and cooling. They use the highly efficient COOL-TEC+ core and high-quality polished aluminium end tanks. Our intercoolers are among the few pressure tested above 10 bar.

Dimensions

• Overall size: 700x180x65 mm
• Core size: 550x180x65 mm
• Inlet / outlet outer diameter: 2.5" (63 mm)

COOL-TEC+ core

COOL-TEC+ is an improved bar & plate core. Its staggered internal fins are spaced to avoid turbulence without restricting flow, and their layout forces air across the whole cooling surface. The result is very high thermal efficiency with low pressure drop.

TurboWorks front mount intercooler 550x230x65, 63 mm inlet, black

TurboWorks front mount intercoolers offer excellent airflow, durability and cooling. They use the highly efficient COOL-TEC+ core and high-quality aluminium end tanks. Our intercoolers are among the few pressure tested above 10 bar.

Dimensions

• Overall size: 700x230x65 mm
• Core size: 550x230x65 mm
• Inlet / outlet outer diameter: 2.5" (63 mm)

Also available with 2.25" (57 mm) inlet / outlet.

COOL-TEC+ core

COOL-TEC+ is an improved bar & plate core. Its staggered internal fins are spaced to avoid turbulence without restricting flow, and their layout forces air across the whole cooling surface. The result is very high thermal efficiency with low pressure drop.

TurboWorks front mount intercooler 600x300x76, 76 mm inlet, black

TurboWorks front mount intercoolers offer excellent airflow, durability and cooling. They are a direct upgrade over stock intercoolers and help the engine make more power. Our intercoolers are among the few pressure tested above 10 bar.

Dimensions

• Overall size: 780x300x76 mm
• Core size: 600x300x76 mm
• Inlet outer diameter: 3" (76 mm)

Suitable for front mount installation in any tuning project.

COOL-TEC+ core

TurboWorks intercoolers use the efficient COOL-TEC+ core and top-quality aluminium end tanks. Cores with finer fins cool poorly, while COOL-TEC+ cores use denser fins for a clear improvement in cooling.

TurboWorks intercooler 550x230x65, 57 mm inlet, grey

Universal front-mount TurboWorks intercooler with a COOL-TEC+ core and polished high-grade aluminium end tanks. TurboWorks intercoolers are tested above 10 bar (manufacturer claim).

Dimensions

• Overall size: 700x230x65 mm
• Core size: 550x230x65 mm
• Inlet/outlet outer diameter: 2.25" (57 mm)

COOL-TEC+ core

COOL-TEC+ is an improved version of the bar & plate core. The internal fins are staggered, and their density is chosen so they do not create turbulence or restrict the flow area. The fin layout forces air through the entire cooling surface, giving high thermal efficiency with low flow resistance.

Also available: version with 63 mm (2.5") inlet.

TurboWorks intercooler 450x230x65 mm, 63 mm inlet

TurboWorks front-mount intercoolers offer excellent airflow, high durability and strong cooling. They use the highly efficient COOL-TEC+ core, with end tanks made of high-grade polished aluminium.

COOL-TEC+ is an improved version of the bar & plate core. Its internal fins are staggered, with a density chosen so it does not create turbulence or restrict flow, and the fin layout forces air through the entire cooling surface. The result is very high thermal efficiency with low pressure drop and high flow.

Our intercoolers are among the few tested at over 10 bar. COOL-TEC+ cores use a denser fin pattern than conventional cores, which gives a noticeable improvement in cooling.

Dimensions

• Overall size: 600 x 230 x 65 mm
• Core size: 450 x 230 x 65 mm
• Inlet diameter: 2.5" (63 mm)

TurboWorks intercooler 600x300x102 mm backwards, 76 mm inlet / outlet

TurboWorks intercoolers offer excellent airflow, top durability and strong cooling. They use the COOL-TEC+ core with top-quality polished aluminium end tanks.

Specifications

• Core: 600 x 300 x 102 mm
• Inlet / outlet diameter: 76 mm, backwards layout
• COOL-TEC+ core
• Tested above 10 bar

COOL-TEC+ core

COOL-TEC+ is an improved bar & plate core. Its staggered internal fins are spaced to avoid turbulence and pressure loss, and they force air through the whole cooling surface. The result is very high thermal efficiency with low flow resistance. Other cores with finer fins cool poorly; COOL-TEC+ uses denser fins for noticeably better cooling.

Turbo Works B08 hydraulic handbrake, long
 
The handbrake has a very robust, powder-coated construction. The kit includes the components shown in the pictures below: handbrake with 42 cm lever; master cylinder. The master cylinder has connections: inlet - AN4 - 7/16" outlet - AN3 - 3/8"

Turbo Works B05 Hydraulic Handbrake
 
The handbrake has a very durable, powder-coated construction.Lever length - 33cm.The set includes the elements shown in the pictures below:handbrake,master cylinder.The master cylinder has connections:inlet - AN4 - 7/16"outlet - AN3 - 3/8"

Blow-off adapter for VAG 2.0T FSI BWA
 
Designed to fit perfectly in place of the factory bypass valve.
 
The adapter is compatible with BOSCH valves.
 
Allows excess air to vent to the atmosphere with a clearly audible sound.
 
The adapter can be used not only on vehicles equipped with OEM solenoid valve part number 06 F 145 710 D, but will also fit earlier engine models such as the 2.0 FSI, older 2.0 TFSi, and 5-cylinder TTRS.
 
Not suitable for 2014+ models
 
Dimensions:
 
Height: 45 mm
Top diameter: 30 mm
Diameter at the central part: 35 mm
Diameter of the opening at the bottom: 35 mm
Distance between screws: 47 mm

Balanced in Europe on a high-quality CAB machine.
 
The individual approach to each turbine guarantees high performance and reliability.
 
Top-quality Japanese bearings ensure excellent spool-up and high pressure.
 
Specification:

Bearings: Floating Bearings
Compressor wheel: 58/76.2mm
Turbine wheel: 65.15/48mm
Downpipe flange: 5-Bolt
Compressor inlet diameter: 76mm
Compressor outlet diameter: 51mm

Oil drain turbo adapter.Material: SS Grade
Fitting Specification: Oil drain bolt to bolt 38mm.Bolts and gaskets included.Application: For GT25 GT28 GT30 GT35 turbochargersSize: M8x1.25mm bolt Oil drain bolt to bolt 38mm, suitable for M8x1.25mm bolt

Oil line adapter AN10 T3, T4, T04 GT40-TG55.
 
Manufacturer: TurboWorks.

Oil feed line for T25 / T28 turbos.

Material: Stainless steel
Line length: 90cm
Adapter: 1/8NPT
The set includes all items shown in the picture.

3mm Turbo Vacuum Hose - TurboWorks, black
 
Price for 1 linear meter.
 
If you purchase more than 5m, the product may be delivered in several packages.
 
Universal silicone hoses. Very durable material allows air and water flow at temperatures from -60 to +290C and pressure up to 5kg/cm2. Silicone hoses are also used to protect against oxidation, kinking and to improve the aesthetics of other cables and engine equipment.
 
The silicone compound ensures long-lasting elasticity.

20mm Turbo Vacuum Hose - TurboWorks Pro, Blue

Price per 1 linear meter.
 
If purchasing more than 5m, the product may be delivered in multiple packages.
 
Universal silicone hoses. Highly durable material allows for air and water flow at temperatures from -60 to +290C and pressures up to 5kg/cm2. Silicone hoses are also used to protect against oxidation, kinking, and to improve the aesthetics of other cables and engine equipment.
 
The inner layer of silicone is made from a newly developed compound, resistant to oil vapors, lubricants, and coolants. It is ideal for professional applications where quality and reliability are paramount.

TurboWorks universal car radiator 63 x 46.5 x 8 cm

Universal car radiator from TurboWorks.

Dimensions

• Core size: 48.5 x 45.5 x 5 cm
• Overall size: 63 x 46.5 x 8 cm
• Inlet / outlet diameters: 40 mm and 45 mm

Delivery

This item is delivered in 10–14 working days.

TurboWorks universal car radiator 55.5 x 46.5 x 8 cm

Universal car radiator from TurboWorks.

Dimensions

• Core size: 41 x 44.5 x 5 cm
• Overall size: 55.5 x 46.5 x 8 cm
• Inlet / outlet diameters: 40 mm and 45 mm

Thermal insulation 0.2mm 500x600m, stainless steel
 
Insulation for exhaust systems and engine compartments.
 
A product originating from professional motorsport.
 
0.2mm thickness with a special relief, allowing for very good deformability and reflecting thermal radiation.
 
Used in exhaust systems - exhaust manifolds, downpipes, catalytic converters, DPF filters.
 
Heat-resistant stainless steel material 1.4828 (AISI 309), resistant to corrosion and high temperatures.
 
In combination with a self-adhesive silicate mat, it provides a long-lasting and safe thermal insulation effect. Safe, because heat-resistant stainless steel does not absorb liquids, oil, fuels, unlike other types of exhaust system insulation.

Thermal insulation made of SiO2 silicate glass fibers is characterized by a high silicon oxide content and is particularly suitable for high-temperature applications up to 1100°C, and temporarily up to 1600°C.
 
Technical parameters:
 
Classification temperature of 1100°C
 
Bulk density 130kg/m3
 
Thermal conductivity λ for temperature:
 
400 °C - 0.104W/mK
 
600 °C - 0.172W/mK
 
800 °C - 0.263W/mK
 
1000 °C - 0.377W/mK
 
Self-adhesive on one side as an aid during installation.
 
The price is for 500mm x 600mm
 
Applications in automobiles: in exhaust systems - exhaust manifolds, downpipes, catalytic converters, DPF filters, or covers on the floor of the bulkhead wall, etc.

Y-pipe exhaust connector 2 × 51 mm to 57 mm, stainless steel

Metal Y-pipe connector for building exhaust systems on V engines. It speeds up the exhaust gas flow while balancing the pressure between the cylinder banks. Increases power and torque (manufacturer data).

Use it to merge two exhaust pipes into one (V engines, Boxer) or to split the exhaust into two mufflers.

Specifications

• Type: Y-pipe
• Diameters: 2 × 51 mm (branches) and 1 × 57 mm (main pipe)
• Material: stainless steel
• Dimensions: see the last photo in the gallery

Not sure which diameter you need? Send us the pipe size of your exhaust and we will help you choose.

X-pipe exhaust connector 76 mm, stainless steel

Metal X-pipe connector for building exhaust systems on V engines. It speeds up the exhaust gas flow while balancing the pressure between the cylinder banks. Increases power and torque (manufacturer data).

Specifications

• Type: X-pipe
• Inlet/outlet diameter: 2 × 76 mm
• Material: stainless steel
• Dimensions: see the last photo in the gallery

Not sure which diameter you need? Send us the pipe size of your exhaust and we will help you choose.

TurboWorks Flat Fan - 14 inch
 
Application in motorsport and tuning. The fan can work as a suction or pressure fan, changing the direction of the airflow by rotating the impeller and changing the polarity of the fan.

Technical data:
 
6cm thickness
14 inch diameter
12V voltage
80W power

TurboWorks Flat Fan - 12 inch
 
Applications in motorsports and tuning. The fan can operate as a puller or pusher, changing the direction of the airflow by rotating the fan blade and reversing the polarity of the fan.

Technical data:
 
6cm thickness12 inches diameter12V voltage80W power