Turbo Works

V-Band Clamp 76mm - TurboWorks.

Flange diameter: 3" (76 mm)
 
 
Flange and clamp made of 304 stainless steel.
For use in turbo and exhaust systems.
 
The new design allows for quick removal of the clamp.

Dimensions:
 
Inner diameter: 76 mm
Outer diameter (welding side): 84 mm
Outer diameter (band side): 94 mm

V-Band Clamp 57mm - TurboWorks.
 
V-Band clamp for connecting exhaust system components.
 
Provides a tight connection and facilitates the disassembly of system components.

V-Band clamp with flanges 89mm - TurboWorks.

Flange diameter: 3.5" (89 mm)
 
Flange and clamp made of 304 stainless steel.
 
For use in turbo and exhaust systems.

Electric Cut-Off Valve for exhaust generation, 76mm.
 
The exhaust valve throttle controls the sound volume of the exhaust system.
The device is usually installed just behind the catalytic converter, while the exhaust gas flow is controlled by an electronically operated throttle valve.
Material: Aluminum
 
The module can only operate in a fully open or fully closed position.
 
Operation in intermediate positions is not allowed.

Vacuum open Cut Off valve for generation, 76mm.
 
The exhaust cut off valve module, controlled by vacuum opening.
 
The throttle of the exhaust valve controls the volume of the exhaust system.
 
The device is usually mounted just behind the catalytic converter.
 
The module opens at a pressure of about 1 BAR.
 
Material: SS304 stainless steel

Sport muffler resonator 76mm L355mm TurboWorks RS 409SS.

High-quality muffler made of SS409 stainless steel using Hi-Flow technology.
 
They ensure maximum exhaust gas flow.
 
They are among the best mufflers on the market.
 
A wide range of available diameters, sizes, and versions will allow you to build an excellent exhaust system.
 
All muffler dimensions are given in the gallery image.

Sports exhaust resonator, 76mm inlet, two 63mm outlets, L355mm - TurboWorks RS 409SS.

High-quality muffler, made of the highest quality 409SS stainless steel using Hi-FlowY technology.

Mufflers made with Hi-FlowY technology combine a Hi-Flow muffler and a Y-pipe, thus providing maximum power increase and good attenuation.

They ensure maximum exhaust gas flow.

Sports Silencer 76mm TurboWorks RS 304SS 450mm
 
Through-flow central silencer, made of high-quality stainless steel with the designation 304SS. Due to its construction and dimensions, it is suitable for building exhaust systems where there is no space for using a standard elliptical silencer.
 
Dimensions:
 
overall length: 600 mm,
body length: 450 mm,
body diameter: 145 mm

Sports Silencer Resonator 70mm L355mm TurboWorks RS 409SS.

High-quality silencer made of 304SS stainless steel using Hi-Flow technology.
 
Ensures maximum exhaust gas flow.
 
Some of the best silencers on the market.
 
All silencer dimensions are shown in the gallery image.

Sports rear muffler 76mm with 100mm tip - TurboWorks.

Made of polished stainless steel.
Manufacturer: TurboWorks.
Inlet diameter: 3" 76mm.
 
All dimensions are shown in the drawing.

TurboWorks RS 409SS 63mm L355mm sport resonator.
 
High-quality muffler made of stainless steel with Hi-Flow technology.

Sports resonator muffler 77mm L300mm TurboWorks RS 304SS.
 
High-class sports muffler, made of 304SS stainless steel.
Dimensions:
 
overall length: 450 mm
case length: 300 mm
case diameter: 145 mm

Sports muffler resonator 89mm L300mm TurboWorks RS 304SS.
 
High-end sports muffler made of 304SS stainless steel. Detailed dimensions in the last photo of the listing.

89mm L450mm TurboWorks RS 304SS Performance Resonator.
 
High-grade performance muffler, made of 304SS stainless steel. Detailed dimensions are in the last picture of the listing.

Intercooler 550x230x65 inlet 57mm - TurboWorks, grey.
 
TurboWorks front mount intercoolers have excellent airflow.
We guarantee the highest durability and excellent cooling.
They feature the most efficient COOL-TEC + core on the market, with walls made of the highest quality polished aluminum.
 
COOL-TEC + is an improved version of the Bar & Plate core. It has staggered internal fins, but their density is chosen so as not to cause turbulence and not reduce its clearance. In addition, the arrangement of the fins forces air to flow through the entire cooling surface. By combining these elements, we achieve very high thermal efficiency while maintaining a low drag coefficient and high performance.
 
Our intercoolers are among the few that have been tested at over 10 bar.
In the photo below, you can see how the new COOL-TEC + core is constructed.
Overall intercooler dimensions: 700x230x65mm
Core dimensions: 550x230x65mm
Outer diameter of inlet / outlet: 2.25" (57mm)
An intercooler with an inlet/outlet diameter of 2.5" (63mm) is also available.
Suitable for front mounting in any tuning project.
 
All orders for tuning intercoolers placed by 5:00 PM are fulfilled on the same day. For the city of Sofia, we at SelectParts.BG also offer personal delivery for your convenience.

Inverted intercooler 500x300x76, inlet 76mm - TurboWorks
 
TurboWorks front-mount intercoolers have excellent airflow. We guarantee the highest durability and excellent cooling. They feature the most efficient COOL-TEC+ core on the market – walls made of the highest quality polished aluminum. COOL-TEC+ is an improved version of the Bar & Plate core. It has staggered internal fins, but their density is chosen so as not to cause turbulence and not to reduce the clearance. In addition, the arrangement of the fins forces air to pass through the entire cooling surface. By combining these elements, we achieve very high thermal efficiency while maintaining a low drag coefficient and high performance. Our intercoolers are among the few that have been tested at over 10 bar. Inlet diameter: 76 mm. Other cores have finer fins, resulting in poor cooling, while COOL-TEC+ cores are made of denser fins, ensuring a significant improvement in cooling.

Wastegate adapter Tial 38mm to V-Band 44mm
 
Wastegate adapter flange.
 
Adapter from Tial 38mm to 44mm V-Band
 
Material: stainless steel
 
Dimensions are shown in the last picture in the gallery.

Oil feed line for T25 / T28 turbos.

Material: Stainless steel
Line length: 90cm
Adapter: 1/8NPT
The set includes all items shown in the picture.

Vacuum hose for turbo 20mm - TurboWorks Pro, black

Price per 1 linear meter.
 
If purchasing more than 5m, the product may be delivered in multiple packages.
 
Universal silicone hoses. Very durable material allows air and water flow at temperatures from -60 to +290C and pressure up to 5kg/cm2. Silicone hoses are also used to protect against oxidation, kinking, and to improve the aesthetics of other engine cables and equipment.
 
The inner silicone layer is made of a newly developed compound, resistant to oil vapors, lubricants, and coolants. It is ideal for professional applications where quality and reliability are paramount.

Universal car water radiator TurboWorks.
Dimensions:
Core dimensions: 48.5x45.5x5cm
Overall dimensions: 63x46.5x8cm
Inlet, outlet diameters: 40mm and 45mm
Delivery - 10-14 business days.

Universal TurboWorks car radiator.
Dimensions:
Core dimensions: 41x44.5x5cm.
Overall dimensions: 55.5x46.5x8cm.
Inlet, outlet diameters: 40mm and 45mm.

Thermal insulation 0.2mm 500x600m, stainless steel
 
Insulation for exhaust systems and engine compartments.
 
A product originating from professional motorsport.
 
0.2mm thickness with a special relief, allowing for very good deformability and reflecting thermal radiation.
 
Used in exhaust systems - exhaust manifolds, downpipes, catalytic converters, DPF filters.
 
Heat-resistant stainless steel material 1.4828 (AISI 309), resistant to corrosion and high temperatures.
 
In combination with a self-adhesive silicate mat, it provides a long-lasting and safe thermal insulation effect. Safe, because heat-resistant stainless steel does not absorb liquids, oil, fuels, unlike other types of exhaust system insulation.

Thermal insulation made of SiO2 silicate glass fibers is characterized by a high silicon oxide content and is particularly suitable for high-temperature applications up to 1100°C, and temporarily up to 1600°C.
 
Technical parameters:
 
Classification temperature of 1100°C
 
Bulk density 130kg/m3
 
Thermal conductivity λ for temperature:
 
400 °C - 0.104W/mK
 
600 °C - 0.172W/mK
 
800 °C - 0.263W/mK
 
1000 °C - 0.377W/mK
 
Self-adhesive on one side as an aid during installation.
 
The price is for 500mm x 600mm
 
Applications in automobiles: in exhaust systems - exhaust manifolds, downpipes, catalytic converters, DPF filters, or covers on the floor of the bulkhead wall, etc.

Metal Y-Pipe Connector for Exhaust System 76-76mm
 
The connector is designed for building exhaust systems in V-engines.
 
It accelerates the exhaust gas exit while balancing the pressure between cylinder banks.
 
Guarantees an increase in power and torque.
 
The element can be used to connect two exhaust pipes into one (V-engines, Boxer) or to split the exhaust into 2 mufflers.
 
Made of stainless steel.
 
Dimensions are shown in the last image in the gallery.
 
Inlet/Outlet diameter: 2x76mm and 1x76mm.

Metal Y-Pipe Connector for Exhaust System 63-63mm
 
The connector is designed for building exhaust systems in V-shaped engines.
 
It accelerates the exhaust gas flow while balancing the pressure between cylinder banks.
 
Guarantees an increase in power and torque.
 
The element can be used to connect two exhaust pipes into one (V engines, Boxer) or to split the exhaust into 2 mufflers.
 
Made of stainless steel.
 
Dimensions are shown in the last image in the gallery.
 
Inlet/outlet diameter: 2x63mm and 1x63mm.

TurboWorks Flat Fan - 40.64 cm.
 
Application in motorsport and tuning. The fan can operate as a suction or pressure fan, changing the direction of airflow by rotating the blade and changing the polarity of the fan.

Technical data:
 
6cm thickness
16 inches diameter
12V voltage
80W power

TurboWorks Flat Fan - 12 inch
 
Applications in motorsports and tuning. The fan can operate as a puller or pusher, changing the direction of the airflow by rotating the fan blade and reversing the polarity of the fan.

Technical data:
 
6cm thickness12 inches diameter12V voltage80W power

SPAL type mounting kit for car fans available in our store.

Flat fan TurboWorks - 25.4 cm.
 
Application in motorsport and tuning. The fan can operate as suction or blowing, changing the direction of the airflow by rotating the blade and changing the polarity of the fan.

Technical data:
 
6cm thickness
10 inch diameter
12V voltage
80W power

AN10 straight fitting - TurboWorks
 
 
Used for:
 
oil system,
water system,
fuel system.
For use with rubber and nylon hoses