Turbo Works

Conical Air Filter Inlet 101mm, L150mm - TurboWorks
 
Turbo Works conical filters are characterized by:- Easy installation thanks to a rubber collar with a hose clamp;- Increased power and torque;- Unique sound and appearance under the hood;- Very long lifespan - due to the possibility of cleaning and maintenance.THE FILTER HAS ISO 9001 CERTIFICATIONDimensions:
Height - 150 mmBottom width - 150 mmTop width - 110 mmInlet - 101 mm

Conical Air Filter Inlet 101mm, L100mm - TurboWorks
 
Turbo Works conical filters are characterized by:- Easy installation thanks to a rubber collar with a hose clamp;- Increased power and torque;- Unique sound and appearance under the hood;- Very long lifespan - thanks to the possibility of cleaning and maintenance.THE FILTER HAS ISO 9001 CERTIFICATEMeasurements:
Height - 100 mmWidth bottom - 150 mmWidth top - 110 mmInlet - 101 mm

Flexible hose that facilitates the supply of cool air to the car's air filter.

Cool air contains more oxygen per unit volume, therefore the fuel mixture burns more efficiently - the efficiency of the power unit increases.

Diameter 77mm, length from 32cm to 102cm.

Exhaust/tip adapter 2.25-2.5" (57-63 mm) – TurboWorks

Stainless steel TurboWorks adapter (reducer) for metal exhaust systems that joins pipes with 57 mm and 63 mm (2.25" and 2.5") inner diameters. Its length is 125 mm. It can also be used as an exhaust tip.

Specifications

• Inner diameters: 57 mm / 63 mm (2.25" / 2.5")
• Length: 125 mm
• Material: stainless steel
• Brand: TurboWorks

Not sure which size you need? Contact us and we will help you choose.

Reinforced 63 x 150 mm 304 stainless exhaust flex pipe – TurboWorks

Professional reinforced (Pro) exhaust flex pipe with a 63 mm inner diameter and 150 mm length, made of 304 stainless steel, with an inner interlock liner and an outer braid. It is stronger than standard flex pipes, and its construction allows it to flex and take up exhaust system movement.

Specifications

• Inner diameter: 63 mm
• Length: 150 mm
• Version: reinforced (Pro)
• Construction: inner interlock liner and outer braid
• Material: 304 stainless steel (304SS)
• Brand: TurboWorks

Not sure which diameter or length you need? Contact us and we will help you choose.

Reinforced 76 x 150 mm 304 stainless exhaust flex pipe – TurboWorks

Professional reinforced (Pro) exhaust flex pipe with a 76 mm inner diameter and 150 mm length, made of 304 stainless steel, with an inner interlock liner and an outer braid. It is stronger than standard flex pipes, and its construction allows it to flex and take up exhaust system movement.

Specifications

• Inner diameter: 76 mm
• Length: 150 mm
• Version: reinforced (Pro)
• Construction: inner interlock liner and outer braid
• Material: 304 stainless steel (304SS)
• Brand: TurboWorks

Not sure which diameter or length you need? Contact us and we will help you choose.

76 mm exhaust pipe coupler – join exhaust tubing

This coupler joins two 76 mm exhaust pipes when building or repairing an exhaust system.

Specifications

• Pipe diameter: 76 mm
• Length: 125 mm
• Brand: TurboWorks

Not sure which size you need? Contact us and we will help you choose.

Titanium heat blanket for T25/T28 turbocharger.
The blanket is designed to lower the temperature under the car's hood by thermally insulating the turbo. The heat from the turbocharger is contained within the system, which increases the temperature of the exhaust gases and accelerates their exit. The retained heat also has a positive effect on the temperature of cooling components, such as the intercooler or oil cooler. Thermal resistance up to 1400 C. The set includes a blanket and springs to secure the blanket to the turbo. The inner layer is further reinforced with a stainless steel mesh.

Titanium heat blanket for T3 turbocharger
The blanket is designed to lower the temperature under the car's hood by insulating the turbocharger. The heat from the turbocharger is contained within the system, which increases the exhaust gas temperature and the speed at which the exhaust gases exit. The retained heat also has a positive effect on the temperature of cooling elements, such as the intercooler or oil cooler. Thermal resistance up to 1400 C. The set includes a blanket and springs to secure the blanket to the turbocharger. The inner layer is further reinforced with stainless steel mesh.

V-Band Clamp 76mm Pro - TurboWorks.

Flange diameter: 3" (76 mm)
 
 
304 stainless steel flange and clamp.
For use in turbo and exhaust systems.
 
The new design allows for quick removal of the clamp.

Round sport muffler 76 mm, L 450 mm, 304SS – TurboWorks

Round straight-through centre muffler by TurboWorks, made of 304SS stainless steel. Thanks to its shape and size it suits exhaust systems where there is no room for a standard oval muffler.

Specifications

• Inlet diameter: 76 mm
• Box length: 450 mm
• Overall length: 600 mm
• Box diameter: 145 mm
• Material: 304SS stainless steel
• Brand: TurboWorks

Not sure which size you need? Contact us and we will help you choose.

TurboWorks RS 409SS sports muffler, 57 mm, 300 mm body

High-grade sports muffler / resonator made of 409SS stainless steel. Its compact round body fits easily into custom exhaust systems.

Dimensions

• Inlet: 57 mm
• Overall length: 450 mm
• Body length: 300 mm
• Body diameter: 119 mm

TurboWorks 409SS sports muffler with internal X-pipe, 57 mm, L355 mm

High-quality muffler / resonator made of SS409 stainless steel using Hi-Flow technology, with an X-pipe inside the body. It delivers maximum exhaust flow.

Features

• Inlet: 57 mm
• Length: 355 mm
• Internal design: X-pipe
• Material: 409SS stainless steel

Sport muffler resonator 89 mm, L 450 mm, 304SS – TurboWorks

High-end TurboWorks sport muffler (resonator) made of 304SS stainless steel. Detailed dimensions are shown in the last gallery image.

Specifications

• Inlet diameter: 89 mm
• Box length: 450 mm
• Material: 304SS stainless steel
• Brand: TurboWorks

Not sure which size you need? Contact us and we will help you choose.

TurboWorks front mount intercooler 550x180x65, 63 mm inlet, black

TurboWorks front mount intercoolers offer excellent airflow, durability and cooling. They use the highly efficient COOL-TEC+ core and high-quality aluminium end tanks. Our intercoolers are among the few pressure tested above 10 bar.

Dimensions

• Overall size: 700x180x65 mm
• Core size: 550x180x65 mm
• Inlet / outlet outer diameter: 2.5" (63 mm)

COOL-TEC+ core

COOL-TEC+ is an improved bar & plate core. Its staggered internal fins are spaced to avoid turbulence without restricting flow, and their layout forces air across the whole cooling surface. The result is very high thermal efficiency with low pressure drop.

AN10 hose with straight and 90-degree fittings, 60cm - PTFE

Teflon oil line AN10.

Parameters:

Material: Teflon
Braid: Stainless steel
Temperature: max. 230°C
Pressure: max 60BAR
Tip thread: 2xAN10
Length: 60cm
The best oil hoses on the market.

Adapted to work at pressures ten times higher than those in the oil system - no more cracks and leaks.

They withstand the toughest operating conditions in rally cars.

Aluminum thermal protection for floor, tunnel, bulkhead, gearboxes from TurboWorks.


Dimensions: 0.5mm x 60cm x 60cm

Temperature resistance: 950 °C

Y-pipe exhaust connector 2 × 63 mm to 76 mm, stainless steel

Metal Y-pipe connector for building exhaust systems on V engines. It speeds up the exhaust gas flow while balancing the pressure between the cylinder banks. Increases power and torque (manufacturer data).

Use it to merge two exhaust pipes into one (V engines, Boxer) or to split the exhaust into two mufflers.

Specifications

• Type: Y-pipe
• Diameters: 2 × 63 mm (branches) and 1 × 76 mm (main pipe)
• Material: stainless steel
• Dimensions: see the last photo in the gallery

Not sure which diameter you need? Send us the pipe size of your exhaust and we will help you choose.

Y-pipe exhaust connector 2 × 63 mm to 63 mm, stainless steel

Metal Y-pipe connector for building exhaust systems on V engines. It speeds up the exhaust gas flow while balancing the pressure between the cylinder banks. Increases power and torque (manufacturer data).

Use it to merge two exhaust pipes into one (V engines, Boxer) or to split the exhaust into two mufflers.

Specifications

• Type: Y-pipe
• Diameters: 2 × 63 mm (branches) and 1 × 63 mm (main pipe)
• Material: stainless steel
• Dimensions: see the last photo in the gallery

Not sure which diameter you need? Send us the pipe size of your exhaust and we will help you choose.

TurboWorks 10" (25.4 cm) slim electric fan – push / pull

A slim electric fan for motorsport and tuning applications. At only 6 cm thick it fits where space is tight – for example in front of or behind a radiator, intercooler or oil cooler.

The fan works in either pull (suction) or push (blower) mode: to reverse the airflow, flip the blade and swap the polarity.

Specifications

• Diameter: 10 in (25.4 cm)
• Thickness: 6 cm
• Voltage: 12 V
• Power: 80 W
• Airflow direction: reversible (push / pull)

Flat fan TurboWorks - 25.4 cm.
 
Application in motorsport and tuning. The fan can operate as suction or blowing, changing the direction of the airflow by rotating the blade and changing the polarity of the fan.

Technical data:
 
6cm thickness
10 inch diameter
12V voltage
80W power

TurboWorks Silicone Elbow 45° 57mm Extended

The TurboWorks 45° silicone elbow with a 57mm diameter connects pipework in turbo (intake) systems and cooling systems wherever the run needs to change direction by 45°. It is made from high-quality silicone with 4-ply reinforcement and resists coolants, greases and oil vapour.

• Diameter: 57 mm
• Angle: 45°
• Version: extended
• Colour: black
• Reinforcement: 4-ply
• Wall thickness: 5 mm
• Tested to: 7 bar
• Operating temperature: -50 to +260 °C
• Application: intake system (turbo pipes), cooling system

Browse all silicone hoses for turbo pipes.

90° Aluminium Pipe 57mm, 30cm Total Length

This 57mm 90-degree aluminium pipe is a universal section for building turbo and intercooler piping. Join it with silicone couplers and clamps of the same diameter.

Dimensions

• Diameter: 57 mm
• Angle: 90°
• Leg length (L): 15 cm
• Total pipe length: 30 cm
• Material: aluminium

We also stock a wide range of silicone hoses and couplers.

TurboWorks 90° aluminium pipe 63 mm, 2 x 30 cm

Universal aluminium pipe for building turbo and intercooler piping.

Dimensions

• Diameter: 63 mm
• Angle: 90°
• Length of each leg (L): 30 cm
• Total pipe length: 60 cm

Need a straight pipe? See the straight aluminium pipe 63 mm, 60 cm. We also stock a wide range of silicone couplers.

Straight Aluminium Pipe 70mm, 10cm Long

This 70mm straight aluminium pipe is a universal section for building turbo and intercooler piping. Join it with silicone couplers and clamps of the same diameter.

Dimensions

• Diameter: 70 mm
• Shape: straight (0°)
• Length: 10 cm
• Material: aluminium

We also stock a wide range of silicone hoses and couplers.

Straight Aluminium Pipe 51mm, 20cm Long

This 51mm straight aluminium pipe is a universal section for building turbo and intercooler piping. Join it with silicone couplers and clamps of the same diameter.

Dimensions

• Diameter: 51 mm
• Shape: straight (0°)
• Length: 20 cm
• Material: aluminium

We also stock a wide range of silicone hoses and couplers.

Aluminium pipe ∅76 mm, 60 cm long

Universal straight aluminium pipe for building intake systems and intercooler piping.

Features

• Outer diameter: 76 mm
• Length: 60 cm
• Shape: straight (0°)
• Material: aluminium

Bent pipes in the same diameter are also available — 90° and 45°.

Oil Sandwich Plate with Thermostat 3/4UNF
 
Oil filter radiator adapter with built-in thermostat.
 
Leading thread: AN10
 
Thermostat operating temperature: 78°C
 
The set consists of:
 
oil filter relocation block
2x AN10 outlet adapter
3 / 4UNF mounting adapter.

Oil Cooler 7 Rows 260x50x50 AN10 - TurboWorks
 
The radiator ensures a lower engine oil temperature. For heavier engines, this is a necessary component and guarantees a longer lifespan and trouble-free operation. The product is recommended for people who like to drive at high speeds, in such cases the oil in the engine reaches too high a temperature, and the standard system does not guarantee proper cooling.
 
Thread: AN10
 
Core dimensions: 260x50x50mm
 
Overall dimensions: 330x50x50mm

The tightening system ensures even force distribution over the hose, preventing damage.
 
Perfect for installing vacuum and water hoses.
 
 
Mounting diameter: 64-76mm.
Strap thickness: 0.8mm.
 
Strap width: 12.5mm.
 
Tightening screw: 8mm wrench or slotted screwdriver.
 
Material: 304SS - stainless steel.