Turbo Works

V-Band Clamp 76mm - TurboWorks.

Flange diameter: 3" (76 mm)
 
 
Flange and clamp made of 304 stainless steel.
For use in turbo and exhaust systems.
 
The new design allows for quick removal of the clamp.

Dimensions:
 
Inner diameter: 76 mm
Outer diameter (welding side): 84 mm
Outer diameter (band side): 94 mm

Electric Cut-Off Valve for exhaust generation, 76mm.
 
The exhaust valve throttle controls the sound volume of the exhaust system.
The device is usually installed just behind the catalytic converter, while the exhaust gas flow is controlled by an electronically operated throttle valve.
Material: Aluminum
 
The module can only operate in a fully open or fully closed position.
 
Operation in intermediate positions is not allowed.

Sport muffler resonator 76mm L355mm TurboWorks RS 409SS.

High-quality muffler made of SS409 stainless steel using Hi-Flow technology.
 
They ensure maximum exhaust gas flow.
 
They are among the best mufflers on the market.
 
A wide range of available diameters, sizes, and versions will allow you to build an excellent exhaust system.
 
All muffler dimensions are given in the gallery image.

Sports resonator muffler 63mm L355mm TurboWorks RS 409SS.

High-quality muffler made of SS409 stainless steel using Hi-Flow technology.
 
They ensure maximum exhaust gas flow.
 
They are among the best mufflers on the market.
 
A wide range of available diameters, sizes, and versions will allow you to build an excellent exhaust system.
 
All muffler dimensions are given in the gallery image.

Sports resonator muffler 77mm L300mm TurboWorks RS 304SS.
 
High-class sports muffler, made of 304SS stainless steel.
Dimensions:
 
overall length: 450 mm
case length: 300 mm
case diameter: 145 mm

Front-mount intercooler 550x230x65, inlet 63mm - TurboWorks
 
TurboWorks front-mount intercoolers have excellent airflow.
We guarantee the highest durability and excellent cooling.
They feature the most efficient COOL-TEC+ core on the market, with walls made of the highest quality polished aluminum.
COOL-TEC+ is an improved version of the Bar & Plate core. It has staggered internal fins, but its density is chosen so as not to cause turbulence and not reduce its clearance. In addition, the arrangement of the fins forces air to flow through the entire cooling surface. By combining these elements, we achieve very high thermal efficiency while maintaining a low drag coefficient and high performance.
Our intercoolers are among the few that have been tested at over 10 bar.
In the image below, you can see how the new COOL-TEC+ core is constructed.
Overall intercooler dimensions: 700x230x65mm
Core dimensions: 550x230x65mm
Inlet / outlet outer diameter: 2.5" (63 mm)
An intercooler with an inlet/outlet diameter of 2.25" (57 mm) is also available.
 
All orders for tuning intercoolers placed by 5:00 PM are fulfilled on the same day. For the territory of Sofia, we at SelectParts.BG also offer personal delivery for your convenience.

Intercooler 550x180x65, inlet 63mm - TurboWorks
 
TurboWorks front intercoolers have excellent airflow.
We guarantee the highest durability and excellent cooling.
They have the most efficient COOL-TEC + core on the market, walls made of the highest quality polished aluminum.
 
COOL-TEC + is an improved version of the Bar & Plate core. It has staggered internal fins, but its density is selected so as not to cause turbulence and not reduce its clearance. In addition, the arrangement of the fins forces air to flow through the entire cooling surface. By combining these elements, we achieve very high thermal efficiency while maintaining a low drag coefficient and high performance.
Our intercoolers are among the few that have been tested above 10 bar.
In the picture below you can see how the new COOL-TEC + core is built
 
Overall intercooler dimensions: 700x180x65mm
Core dimensions: 550x180x65mm
Inlet / outlet outer diameter: 2.5 "(63 mm)
 
All orders for tuning intercoolers placed by 5:00 PM are fulfilled on the same day. For the territory of Sofia, we at SelectParts.BG also offer personal delivery for your convenience.

Tuning Intercooler 600x300x76, inlet 76mm - TurboWorks
TurboWorks front-mount intercoolers have excellent airflow. We guarantee very good durability and excellent cooling. They perfectly replace series intercoolers, increasing vehicle performance. Our intercoolers are among the few that have been tested at over 10 bar. Intercooler dimensions: 780x300x76 mm Core dimensions: 600x300x76mm Inlet outer diameter: 3" (76mm) Suitable for front mounting in any tuning project. TurboWorks intercoolers have an efficient COOL-TEC + core, walls made of the highest quality aluminum. Other cores have finer fins, which leads to poor cooling, while COOL-TEC + cores are made of denser fins, which guarantees a significant improvement in cooling. All orders for tuning intercoolers placed by 5:00 PM are fulfilled on the same day. For the territory of Sofia, we at SelectParts.BG also offer personal delivery for your convenience.

Reversed intercooler 600x300x76, inlet 76mm - TurboWorks

TurboWorks front-mounted intercoolers have excellent airflow. We guarantee very good durability and excellent cooling. They perfectly replace series intercoolers, increasing vehicle performance.
Our intercoolers are among the few that have been tested at over 10 bar.
Inlet outer diameter: 3" (76 mm)
TurboWorks intercoolers have an efficient COOL-TEC+ core, polished aluminum walls of the highest quality.
Other cores have finer fins, resulting in poor cooling, while COOL-TEC+ cores are made of denser fins, ensuring a significant improvement in cooling.

0.7L Dual Port Oil Catch Can

The TurboWorks oil catch tank is made of the highest quality aluminum. It is designed to protect the engine and improve its performance by condensing oil vapors, which enter the intake manifold through the crankcase ventilation and are then sucked into the combustion chambers, leading to a reduction in power.
 
Inlets: 20 mm
Size: 150 mm x 80 mm

Crankcase ventilation tank (oil catch can) with two ports - 0.7l

The TurboWorks oil catch tank is made of the highest quality aluminum. It is designed to protect the engine and improve its parameters by condensing oil vapors, which enter the intake manifold through crankcase ventilation and are then drawn into the combustion chambers, leading to a reduction in power.
 
Inlets: 15 mm
Size: 150 mm x 80 mm

Universal car water radiator TurboWorks.
Dimensions:
Core dimensions: 48.5x45.5x5cm
Overall dimensions: 63x46.5x8cm
Inlet, outlet diameters: 40mm and 45mm
Delivery - 10-14 business days.

Universal TurboWorks car radiator.
Dimensions:
Core dimensions: 41x44.5x5cm.
Overall dimensions: 55.5x46.5x8cm.
Inlet, outlet diameters: 40mm and 45mm.

Thermal insulation 0.2mm 500x600m, stainless steel
 
Insulation for exhaust systems and engine compartments.
 
A product originating from professional motorsport.
 
0.2mm thickness with a special relief, allowing for very good deformability and reflecting thermal radiation.
 
Used in exhaust systems - exhaust manifolds, downpipes, catalytic converters, DPF filters.
 
Heat-resistant stainless steel material 1.4828 (AISI 309), resistant to corrosion and high temperatures.
 
In combination with a self-adhesive silicate mat, it provides a long-lasting and safe thermal insulation effect. Safe, because heat-resistant stainless steel does not absorb liquids, oil, fuels, unlike other types of exhaust system insulation.

SiO2 silicate glass fiber insulation is characterized by a high silicon oxide content and is particularly suitable for high-temperature applications up to 1100°C, temporarily up to 1600°C.
 
Technical parameters:
 
Classification temperature of 1100°C
 
Bulk density 130kg/m3
 
Thermal conductivity λ for temperature:
 
400 °C - 0.104W/mK
 
600 °C - 0.172W/mK
 
800 °C - 0.263W/mK
 
1000 °C - 0.377W/mK
 
Self-adhesive on one side as an aid during installation.
 
Price is for 500mm x 1000mm
 
Automotive applications: in exhaust systems - exhaust manifolds, downpipes, catalytic converters, DPF filters or covers on the bulkhead wall floor, etc.

Thermal insulation 0.1mm 500x1000mm, stainless steel
 
Insulation for exhaust systems and engine compartments.
 
A product originating from professional motorsport.
 
0.1mm thick with a special embossment, allowing for excellent deformability and reflecting thermal radiation.
 
Used in exhaust systems - exhaust manifolds, downpipes, catalytic converters, DPF filters.
 
Material: heat-resistant stainless steel 1.4828 (AISI 309), resistant to corrosion and high temperatures.
 
In combination with a self-adhesive silicate mat, it provides a long-lasting and safe thermal insulation effect. Safe because heat-resistant stainless steel does not absorb liquids, oil, or fuels, unlike other types of exhaust system insulation.

Metal Y-Pipe Connector for Exhaust System 76-76mm
 
The connector is designed for building exhaust systems in V-engines.
 
It accelerates the exhaust gas exit while balancing the pressure between cylinder banks.
 
Guarantees an increase in power and torque.
 
The element can be used to connect two exhaust pipes into one (V-engines, Boxer) or to split the exhaust into 2 mufflers.
 
Made of stainless steel.
 
Dimensions are shown in the last image in the gallery.
 
Inlet/Outlet diameter: 2x76mm and 1x76mm.

X-Pipe metal connector for exhaust system 57-57mm
 
The connector is designed for the construction of exhaust systems in V-shaped engines.
 
It accelerates the exhaust of gases while balancing the pressure between the cylinder banks.
 
Guaranteed to increase power and torque.
 
Made of stainless steel.
 
Dimensions are shown in the last picture in the gallery.
 
Inlet/outlet diameter: 2x57mm

TurboWorks Flat Fan - 40.64 cm.
 
Application in motorsport and tuning. The fan can operate as a suction or pressure fan, changing the direction of airflow by rotating the blade and changing the polarity of the fan.

Technical data:
 
6cm thickness
16 inches diameter
12V voltage
80W power

TurboWorks Flat Fan - 14 inch
 
Application in motorsport and tuning. The fan can work as a suction or pressure fan, changing the direction of the airflow by rotating the impeller and changing the polarity of the fan.

Technical data:
 
6cm thickness
14 inch diameter
12V voltage
80W power

TurboWorks Flat Fan - 12 inch
 
Applications in motorsports and tuning. The fan can operate as a puller or pusher, changing the direction of the airflow by rotating the fan blade and reversing the polarity of the fan.

Technical data:
 
6cm thickness12 inches diameter12V voltage80W power

SPAL type mounting kit for car fans available in our store.

AN10 straight fitting - TurboWorks
 
 
Used for:
 
oil system,
water system,
fuel system.
For use with rubber and nylon hoses

TurboWorks silicone elbow. Application: intake system, cooling system. Quadruple braid, 5mm wall thickness, tested to 7 bar, temperature range -50 to +260 °C. Made of high-quality silicone, resistant to all types of refrigerants, greases, and oil vapors.

Universal aluminum pipe for building turbo lines.
Dimensions:
 
Diameter: 57 mm,
Angle: 90 degrees
Length (L): 17.50 cm
Total pipe length: 35cm
We also offer a large selection of silicone hoses.

Universal aluminum pipe for turbocharger piping.
Dimensions:

Diameter: 57 mm,
Angle: 90 degrees
Length (L): 15cm
Total pipe length: 30cm
We also offer a wide selection of silicones.

Universal aluminum pipe for building turbo lines.
Dimensions:

Diameter: 76 mm.
Angle: 67 deg.
Length (L): 30cm.
Overall pipe length: 60cm.
We also offer a large selection of silicone hoses.

Universal aluminum pipe for building turbo lines.
Dimensions:
 
Diameter: 63 mm.
Angle: 67 deg.
Length (L): 15 cm.
Total pipe length: 30 cm.
We also offer a wide selection of silicone hoses.

Universal aluminum pipe for building turbo lines.
Dimensions:
 
Diameter: 57 mm.
Angle: 67 deg.
Length (L): 30cm.
Total pipe length: 60cm.
We also offer a wide selection of silicones.

Universal aluminum pipe for turbo intercooler piping.
Dimensions:
 
Diameter: 57 mm.
Angle: 45 deg.
Length (L): 30.5 cm.
Total pipe length: 60 cm.
We also offer a wide selection of silicone hoses.