Turbo Works

Pneumatic exhaust cut-off valve for generation.
 
Pneumatic exhaust cut-off valve control kit.
 
The kit includes:
 
- Pneumatic throttle with a diameter of 2.3 inches
- Wireless module and remote control
- Connecting cable

AWG 60mm Sports Resonator Pot
 
Silencer fi 60 with length 40cm.
 
It is designed for both standard engines and those operating above 7000 rpm. Power and torque increase up to 5%. Its use significantly increases the exhaust gas flow rate compared to a traditional exhaust system, thereby improving the air-fuel mixture in the cylinders.

Sports muffler resonator 76mm L450mm TurboWorks RS 409SS.
 
High-end sports muffler, made of 409SS stainless steel.
Dimensions:
 
overall length: 600 mm
box length: 450 mm
box diameter: 148 mm

Front-mounted intercooler 550x230x65, inlet 63mm - TurboWorks
 
TurboWorks front-mounted intercoolers have excellent airflow.
We guarantee the highest durability and excellent cooling.
They feature the most efficient COOL-TEC + core on the market, with walls made of the highest quality polished aluminum.
COOL-TEC + is an improved version of the Bar & Plate core. It has staggered internal fins, but its density is selected not to cause turbulence and not to reduce its clearance. In addition, the arrangement of the fins forces air to flow through the entire cooling surface. By combining these elements, we achieve very high thermal efficiency while maintaining a low drag coefficient and high performance.
Our intercoolers are among the few that have been tested at over 10 bar.
In the picture below, you can see how the new COOL-TEC + core is constructed.
Overall dimensions of the intercooler: 700x230x65mm
Core dimensions: 550x230x65mm
Outer diameter of inlet/outlet: 2.5" (63 mm).
 
All orders for tuning intercoolers placed by 5:00 PM are processed on the same day. For the city of Sofia, we at SelectParts.BG also offer personal delivery for your convenience.

Crankcase ventilation tank (oil catch can) with filter, 10 and 15mm fittings.

The TurboWorks PRO oil catch tank features a double-layer mesh for filtering oil vapor and a screw-in dipstick for checking the oil level in the container.
 
It can operate in an open (filter included) and closed configuration.
 
Dimensions:
 
Height: 114.5mm
Capacity: 300ml
Inlet/outlet diameter: 10, 15 mm

Metal Y-Pipe Connector for Exhaust System 57-76mm
 
The connector is designed for the fabrication of exhaust systems in V-shaped engines.
 
It accelerates the exit of exhaust gases, while balancing the pressure between cylinder banks.
 
Guarantees an increase in power and torque.
 
The element can be used to connect two exhaust pipes into one (V-engines, Boxer) or to divide the exhaust into 2 mufflers.
 
Made of stainless steel.
 
Dimensions are shown in the last picture in the gallery.
 
Inlet/Outlet diameter: 2x57mm and 1x76mm.

Metal X-Pipe Connector for Exhaust System 76-76mm
 
The connector is designed for the fabrication of exhaust systems in V-engines.
 
It accelerates the exhaust gas flow while balancing the pressure between cylinder banks.
 
Guarantees an increase in power and torque.
 
Made of stainless steel.
 
Dimensions are shown in the last image in the gallery.
 
Inlet/outlet diameter: 2x76mm

Universal aluminum pipe for building turbo lines.
Dimensions:
 
Diameter: 63 mm.
Angle: 90 deg.
Length (L): 30 cm.
Total pipe length: 60 cm.
We also offer a wide selection of silicone hoses.

Universal aluminum pipe for building turbo lines.
Dimensions:
 
Diameter: 63 mm,
Angle: 90 degrees
Length (L): 15cm
Total pipe length: 30cm
We also offer a wide selection of silicone hoses.

Universal aluminum pipe for turbo setups.
Dimensions:
 
Diameter: 76 mm.
Angle: 45 deg.
Length (L): 15cm.
Total pipe length: 30cm.
We also offer a wide selection of silicone hoses.

Universal aluminum pipe for building intake systems.

Universal aluminum pipe for building intake systems.

Universal aluminum pipe for building intake systems.

Oil Cooler 13 rows 260x100x50 AN10, black - TurboWorks
 
The radiator guarantees a lower oil temperature in the engine. For heavier engines, this is a necessary element and guarantees a longer life and trouble-free operation. The product is recommended for people who like to drive at high speeds, in such cases the engine oil reaches too high a temperature, and the standard system does not guarantee proper cooling.
 
Thread: AN10
 
Core dimensions: 260x100x50mm
 
Overall dimensions: 330x100x50 mm

Screw clamp suitable for 51mm roads.
 
19mm width, stainless steel.

TurboWorks silicone elbow. Application: intake system, cooling system. Four-layer braiding, wall thickness 5 mm, tested up to 7 bar, temperature range -50 to +260 °C. Made of high-quality silicone, resistant to all types of refrigerants, greases, and oil vapors.

TurboWorks silicone elbow. Application: intake system, cooling system. Four-ply braid, wall thickness 5 mm, tested up to 7 bar, temperature range -50 to + 260 ° C. Made of high-quality silicone, resistant to all types of refrigerants, greases and oil vapors.

TurboWorks silicone connector.
Application: intake system, cooling system.

Four layers, with a wall thickness of 5.5mm-6mm, tested up to 8 bar, temperature range from -70 to + 260 °C.

Connector made of a newly developed silicone compound, resistant to oil vapors, grease, coolants. Ideal for professional applications where quality and reliability are paramount.

TurboWorks silicone elbow. Application: intake system, cooling system. Four-ply braiding, wall thickness 5 mm, tested up to 7 bar, temperature range -50 to +260 °C. Made of high-quality silicone, resistant to all types of coolants, greases and oil vapors.

TurboWorks Silicone Elbow. Application: intake system, cooling system. Quadruple braid, wall thickness 5 mm, tested up to 7 bar, temperature range -50 to +260 °C. Made of high-quality silicone, resistant to all types of refrigerants, greases, and oil fumes.

TurboWorks silicone elbow. Application: intake system, cooling system. Quadruple braid, 5 mm wall thickness, tested up to 7 bar, temperature range -50 to +260°C. Made of high-quality silicone, resistant to all types of coolants, greases and oil vapors.

TurboWorks Silicone Connector, 63mm ID, 100mm Length


Application: intake system, cooling system.
Four-ply, 5mm wall thickness, tested to 7 bar, temperature range -50 to +260°C. Made of high-quality silicone, resistant to all types of refrigerants, greases, and oil vapors.

Dimensions:

D1=63mm
D2=63mm
L=1000mm

Silicone connector TurboWorks, PRO series.
Application: intake system, cooling system.
 
Four layers, with wall thickness of 5.5mm-6mm, tested up to 8 bar, temperature range from -70 to + 260 °C.
 
Connector made of a newly developed silicone compound, resistant to oil vapors, grease, coolants. Ideal for professional applications where quality and reliability are paramount.

TurboWorks silicone connector, PRO series.
Application: intake system, cooling system.
 
Four layers, with a wall thickness of 5.5mm-6mm, tested to 8 bar, temperature range from -70 to + 260 °C.
 
Connector made of a newly developed silicone compound, resistant to oil vapors, grease, coolants. Ideal for professional applications where quality and reliability are paramount.

The plug ensures a 100% tight seal of the connector outlet.

Conical Air Filter, inlet 77mm, L200mm - TurboWorks
 
TurboWorks conical filters are characterized by:- Easy installation thanks to a rubber collar with a hose clamp;- Increased power and torque;- Unique sound and appearance under the hood;- Very long lifespan - thanks to the possibility of cleaning and maintenance.THE FILTER HAS ISO 9001 CERTIFICATIONDimensions:Height - 200 mmBottom width - 150 mmTop width - 110 mmInlet - 77 mm

Flexible hose that facilitates the supply of cool air to the car's air filter.

Cool air contains more oxygen per unit volume, therefore the fuel mixture burns more efficiently - the efficiency of the power unit increases.

Diameter 77mm, length from 32cm to 102cm.

Metal exhaust system reducer.


Length: 125 mm

Flexible pipe for exhaust generation Fi63 L150mm 304SS

Professional flexible pipe for exhaust, made of stainless steel.
 
Stronger than standard ones.
 
Thanks to its design, it facilitates bending in the exhaust system.
 
Inner diameter: 63 mm

Flexible connection for generation Fi76 L100mm Standard 201SS

Flexible stainless steel connection.
 
Length: 10 cm
 
Internal diameter: 76 mm