Exhaust System

Downpipe for BMW F32, F33 420d, 420dx, 425d B47, N47N, N47S1
 
Suitable for cars with catalyst/DPF complying with EURO 6. Downpipe BMW F32, F33 B47, N47N, N47S1420d, 420dx, 425d2012-2017184, 190, 218 bhpDiameter - 63.5 mm Diameter in the connection area with the middle section - 61 mm
The downpipe has the following connections:
- two plugs for lambda sensor
- two threaded plugs for temperature sensor
- one pipe for the pressure sensor hose.
The downpipe is entirely made of high-quality stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9). Each element is developed with CNC technology.
24 months manufacturer's warranty for the product.
 
OE:
 
18308514080
 
18308513960
 
18308514988

Downpipe BMW F25 X3 18d, 20dx, 28dx B47
Highest quality from RM Motors.
Suitable for cars with catalytic converter/DPF meeting EURO 6. Downpipe BMW F25 B47 X3 18d, 20dx, 28dx 2013-2017 150, 184, 190 bhpDiameter - 63.5 mm Diameter in the connection area with the middle part - 61 mm
The downpipe has the following connections:
- two lambda sensor bungs
- two threaded bungs for temperature sensor
- one tube for the pressure sensor hose.
The downpipe is entirely made of high-quality stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9). Each element is developed with CNC technology.
24 months manufacturer's warranty for the product.
 
OE:
 
18308514080
 
18308513960
 
18308514988
 
All orders for tuning downpipes placed by 5:00 PM are processed on the same day. For the territory of Sofia, we at SelectParts.BG also offer personal delivery for your convenience.

Downpipe for BMW F07, F10, F11 N57, N57N, N57Z
 
525d, 530d/dx, 535d/dx 2008-2013 204, 245, 258, 299 bhp
Fits the version originally equipped with a EURO 5 catalytic converter.
Diameter - 76 mm
Diameter in the connection section with the middle part - 70 mm
 
The pipe has the following connections:
- one bung for a lambda sensor;
- two threaded bungs for a temperature sensor;
- one tube for the pressure sensor hose.
It is entirely made of high-quality stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9). Every element is developed with CNC technology.
24 months manufacturer's warranty for the product.
OE number:

18308511143
18307807135
18307805780
18308510429
18308571010
18307823488
18308517726
18308517208
18308512710
18308512692
18307807153
18308511146
18308511147
18308515653
18308513527
18308513529
18308571023
18308571022
18308571009
18308517450
18308517451
18308516089
18308582009
18308515454
18308513526

Downpipe for BMW E87 118d, 120d M47N2
2003-2007 122, 163 bhpDiameter - 63.5 mm Diameter at the connection with the mid-section - 55 mm
The downpipe has the following connections:
– one lambda sensor bung
– one threaded bung for temperature sensor
– one pipe for the pressure sensor hose. The downpipe fits vehicles equipped with a catalytic converter according to EURO 3 standard.
The downpipe is entirely made of high-quality stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9). Each element is developed with CNC technology. 24 months manufacturer's warranty for the product.
 
OE number:
 
18307798309

Downpipe for BMW E81, E87, E82, E88 116d, 118d, 120d, 123d N47
 
Downpipe BMW E81, E87, E82, E88 N47 116d, 118d, 120d, 123d 2006-2013 115, 136, 143, 163, 177, 204 bhp
Diameter - 63.5 mm
Diameter at connection to mid-pipe - 61 mm 
- one lambda sensor bung
- one threaded bung for temperature sensor
The downpipe is entirely made of high-quality stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9). Each element is developed with CNC technology.
24-month manufacturer's warranty for the product.
OE number:
18307812279
18307812281
18307797591
18307812283
18307812285
18307800704
18307811573

Downpipe for BMW E46 318d, 320d M47, M47N
 
Downpipe BMW E46 M47, M47N 318d, 320d 1998-2005 116, 136, 150 hp
Diameter - 63.5 mm
The downpipe has the following connections:
– one bung for a lambda sensor.
The downpipe is entirely made of high-quality stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9). Each element is developed with CNC technology.
24 months manufacturer's warranty for the product.
 
OE number:
 
18317786347
 
18312247656
 
18307792160
 
18307787586
 
18307786714
 
18307790298
 
18304710746

Downpipe for BMW E90, F07, N57 2007-2013, E70, E71 N57, N57S 2009-2013, F25, F26 N57N, N57Z 2013-2016
Suitable for Euro 5E90 E91 E92 E93 325d 330d N57 2007-2013 204/245 HpF07 F10 F11 525d 530d 535d N57 2009-2013 204/245/299/313 HpE70 X5 30dx, 40dx N57, N57S 2009-2013 245/306 HpE71 X6 30dx, 40dx N57, N57S 2009-2014 245/306 HpF25 X3 30dx, 35dx N57N, N57Z 2009-2016 258/313 HpF26 X4 30dx, 35dx N57N, N57Z 2013-2016F01 F02 730d N57 2007-2012 245 HpPipe diameter - 76 mmDownpipe entirely made of acid-resistant steel.
OE numbers:
18308511143
18307807135
18307805780
18308510429
18308571010
18307823488
18308517726
18308517208
18308512710
18308512692
18307807153
18308511146
18308511147
18308515653
18308513527
18308513529
18308571023
18308571022
18308571009
18308517450
18308517451
18308516089

Reducer for metal exhaust system.
 
2 mm wall thickness.
 
Length: 53.7 mm

Reducer for metal exhaust system.
 
2 mm wall thickness.
 
Length: 83 mm

Downpipe for BMW F32, F33, F36 440i, 440ix B58
 
The downpipe fits the version originally equipped with a EURO 6 catalytic converter.
Downpipe BMW F32, F33, F36 B58
440i, 440ix
2016-2018
322 hp
Pipe diameter - 80 mm
Pipe diameter at connection to central section - 80 mm
 
 
Suitable for versions without GPF/OPF.

The pipe has the following connections:
- two lambda sensor bungs;
The exhaust pipe is entirely made of stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9). Each element of the product is manufactured using CNC technology. The product comes with a 24-month manufacturer's warranty.
 
OE numbers:
18328631625
18327643152
18328652180
18328684788

Downpipe BMW E87 118d 120d M47N2 61mm
E87 118D 120D
2003-2007 BMW E90 E91 318d 320d M47N2 2004-2007 163 HpImportant:55mm connecting pipe is recommended for Euro 3 models.61mm connecting pipe is recommended for Euro 4 DPF models.Downpipe entirely made of acid-resistant steel.

Universal lambda sensor bushing (emulator) with nut, 90 degrees
 
Description:
In vehicles with EURO 3 and higher emission standards, the second lambda sensor is located after the catalytic converter.
It plays a diagnostic role. If it detects any irregularities based on data from the engine control unit, it displays an error on the dashboard (usually "CHECK ENGINE") and the engine may go into limp mode (depending on the car brand). This often manifests as a significant drop in power. These problems occur when the catalytic converter is removed or its efficiency is low.
In such situations, it becomes necessary to install a SECOND LAMBDA SENSOR EXTENDER (O2 spacer/bung extender).
A catalytic converter can effectively reduce output power by 2 to 3%, and top speed by up to 5%. Removing it and using an emulator is the easiest way to cheaply increase power.
The emulator can also help with problems with LPG installation, which will show CHECK ENGINE on the dashboard due to detecting a very rich mixture.
Installation is very simple. Unscrew the lambda sensor, screw the emulator into its place, and then screw the lambda sensor back in.

18mm lambda sensor nut
 
The nut is universal and fits almost all lambda sensors. It has an M18x1.5 thread

Satin stainless steel exhaust tip, available with or without a clamp.
 
Internal inlet diameter - 63.5 mm
Tip diameter - 89 mm
Tip length - 105 mm

Beveled end made of brushed stainless steel, available with or without a clamp.
 
Inner inlet diameter - 63.5 mm
Tip diameter - 89 mm
Overall length - 140 mm
Tip length - 105 mm

Metal exhaust system reducer.
 
 
Length: 125 mm

Reduction for metal exhaust system.
 
 
Length: 125 mm

Stainless steel exhaust tip.Dimensions:Outlet diameter: 102 mmInlet diameter: 63 mmLength: 170 mm

Stainless steel exhaust tip.Dimensions:Outlet diameter: 120x75 mmInlet diameter: 63 mmLength: 190 mm

Stainless steel exhaust tip.Dimensions:Outlet diameter: 2x89 mmInlet diameter: 63 mmLength: 260 mm

Reduction for metal exhaust system.
 
 
Length: 125 mm

Flexible pipe for generation Fi64 L100mm, reinforced RM Motors
 
Super flexible exhaust connector. Diameter - 64 mm. Material type - Stainless steel.
Reinforced flexible exhaust connector with interlocking tube. For welding into the exhaust system. The connector suppresses drive unit vibrations, increasing driving comfort and the durability of the entire system. Element entirely made of stainless steel. The product comes with a 24-month manufacturer's warranty.

Flexible pipe for exhaust generation Fi89 L150mm 304SS

Professional flexible exhaust pipe, made of stainless steel.
 
Stronger than standard ones.
 
Thanks to its construction, it facilitates bending in the exhaust system.
 
Inner diameter: 89 mm

Generator Bracket 63x125mm
 
Suitable for generator with diameter: 63 mm
Length: 125 mm

Generation Coupler 60x125mm
 
Suitable for generation with diameter: 60 mm
Length: 125 mm

Flexible hose for exhaust generation Fi76 L100mm Pro 304SS

Flexible stainless steel hose.
 
Length: 10 cm
 
Inner diameter: 76 mm

Heat wrap for exhaust, 50mm x 1mm x 10m, black, TurboWorks
 
Dimensions:
 
Width: 50 mm
Thickness: 1 mm
Length: 10 m
 
Reduces heat loss, thereby reducing power loss. Thermal resistance up to 800 degrees Celsius. Ceramic fiber bandage.

Thermal heat wrap for exhaust 50mm x 2mm x 15m, black, TurboWorks

Dimensions:

Width: 50 mm
Thickness: 2 mm
Length: 15m

Reduces heat loss, thereby reducing power losses. Thermal resistance up to 800 degrees Celsius. Ceramic fiber bandaging.

Epman Titanium Turbo Blanket for T2 T25 T28 GT30 T35 Turbocharger The blanket is designed to lower the temperature under the car's hood by thermally insulating the turbine. The heat from the turbocharger is contained within the system, which increases the exhaust gas temperature and the speed at which the exhaust gases exit. The contained heat also has a positive effect on the temperature of cooling components, such as an intercooler or oil cooler. Thermal resistance up to 1100 C. The set includes the blanket and springs that secure the blanket to the turbine. The inner layer is additionally reinforced with stainless steel mesh.

Titanium turbo blanket for T4 turbocharger.
The blanket is designed to lower the temperature under the car's hood by insulating the turbo. The heat from the turbocharger is contained within the system, which increases the exhaust gas temperature and the speed at which the exhaust gases exit. The retained heat also has a positive effect on the temperature of cooling components, such as the intercooler or oil cooler. Thermal resistance up to 1250 C. The set includes the blanket and springs that hold the blanket to the turbo. The inner layer is additionally reinforced with a stainless steel mesh.