Blow Off Valves

Blow-off adapter for VAG 2.0T FSI BWA
 
Designed to fit perfectly in place of the factory bypass valve.
 
The adapter is compatible with BOSCH valves.
 
Allows excess air to vent to the atmosphere with a clearly audible sound.
 
The adapter can be used not only on vehicles equipped with OEM solenoid valve part number 06 F 145 710 D, but will also fit earlier engine models such as the 2.0 FSI, older 2.0 TFSi, and 5-cylinder TTRS.
 
Not suitable for 2014+ models
 
Dimensions:
 
Height: 45 mm
Top diameter: 30 mm
Diameter at the central part: 35 mm
Diameter of the opening at the bottom: 35 mm
Distance between screws: 47 mm

Diesel blow-off valve, 2 bar - 25mm
 
Valve with full atmospheric discharge or recirculation.
 
Smooth adjustment possible.
 
Thanks to the strong spring, it withstands pressures of up to 2.0 BAR, making it ideal for cars with both diesel and petrol engines.
 
 
Thanks to the partial return of air to the system, it will not cause computer errors.
 
The standard blow-off valve introduces air into the system, while this one expels air, protecting your turbo and at the same time providing an incredible sound effect - the characteristic PSSSSSTT !!!!
 
High quality.
 
The kit includes an adapter and a pipe, adapting the valve for atmospheric discharge or recirculation.
 
Dimensions:
 
Inlet inner diameter: 22mm
Outlet outer diameter (DV adapter): 25 mm
Vacuum nozzle outer diameter: 6 mm

Diesel blow-off valve

Blow Off valve for turbo pressure for diesel cars.
 
AMAZING SOUND EFFECT!!!
 
Protects your turbo!!!
 
Kit for DIESEL engine.
 
Includes:
 
Relief valve with operating pressure above 2.5 BAR
Solenoid
Controller
Power cables
Vacuum hose
High quality
 
Mounting hole diameter: 27 mm

TurboWorks Blow-Off Valve - 25mm
 
AMAZING SOUND EFFECT!!!
 
Protects your turbo!!!
 
The standard DV valve recirculates air, while this one vents air to the atmosphere, which protects your turbo and at the same time provides an incredible sound effect - the characteristic PSSSSSTT!!!!
 
High quality.
 
Includes 2 springs: 0.5 and 1.0 bar
 
Dimensions:
 
Inlet outer diameter: 25 mm.
 
Outlet outer diameter: 27 mm.

Turbosmart Lancer EVO 34mm Blow Off Valve, original

The TurboSmart valve from the American company is an excellent option for those who want a valve that is more efficient than OEM.

Kompact valves are designed as direct replacements for OEM valves.

They are characterized by faster operation, better flow, and higher recharge capacity. The Kompact Plumb Back system returns all pressure back to the intake system.

Application:

Lancer Evolution VIII / IX 03-06
Lancer Evolution X 08-11
It is also suitable for use in any other turbocharged unit.

Epman Greddy RS type Recirculating Blow Off Valve

A blow-off valve is a device for releasing pressure in the intake manifold to prevent turbo compressor surge. When the throttle closes rapidly, the airflow quickly decreases, causing flow instability and pressure fluctuations. Surge can eventually lead to damage to the thrust bearing due to the high loads associated with it. Blow-off valves use a combination of manifold pressure signal and spring force to detect when the throttle is closed.

Features:
Universal 40mm RS style.
CNC machined from cast aluminum with an anodized finish
Opposing spring design allows for improved control, response, and idle
Easily adjustable to eliminate compressor surge and prevent premature pressure leakage, while increasing boost response between shifts.
Withstands up to 30 PSI of pressure.
Range 100-420 hp

Application:
Compatible with standard 2-bolt BOV flanges and RS type outlet adapters.
Turbo engines only!

Epman Diverter Blow Off Valve for VW 1.8T 2.7T - 25mm
 
25mm recirculation valve, suitable for 1.8T, 2.7T and almost all European cars with original 25mm valves. Replaces original Bosch plastic valves, which usually fail at 1 bar pressure. The kit includes three springs of different stiffness (one is already installed in the valve).- 0.34bar-1.03bar (5-15 psi)- 1.03bar-1.58bar (15-23 psi installed in the valve)- 1.58bar-2.75bar (23-40 psi)Suitable up to 2.75 bar.

Epman 25mm blow off valve, single port
 
Specifications:
 
This blow off valve can easily release pressure because it is adjusted by turning the top of the valve.
Manufactured with fine workmanship, which is a good modification to replace your old blow off.
Made of metal, durable and wear-resistant.
The length of the valve is 8.15 cm.
 
Length: 8.15 cm/3.21" (approx.)

HKS Type Blow Off Valve
 
Features:
 
1. Brand new SQV turbo blow-off valve.
 
2. Made of high-quality aluminum alloy, which ensures long-lasting durability.
 
3. Comes with a flange adapter: one side of the valve is 2.5 inches, the other side of the pipe in the car has an outer diameter of 34 mm.
 
4. Works in any turbocharged vehicle, from stock to high pressure.
 
5. The Super Sequential Blow-Off Valve (SSQV) is a dual-stage pull-type relief valve that will not leak under any boost level. This ensures quick valve response and complete closure during idle.
 
6. Instruction included. Professional installation is highly recommended.

Discharge Blow Off Valve Tial Type 2.4 bar - 50mm
 
Feature:
 
1. The dual spring system promotes response and allows for high pressure at boost;
2. Hard anodized valve to increase airflow;
3. The 50mm flange diameter can withstand a boost pressure of 35PSI;
4. CNC machined aluminum housing, powder coated, polished, sucks in ambient air and emits an aggressive and unique discharge sound;
5. Easy to install, welded aluminum flanges, O-rings, and stainless steel V-band clamps.
 
Specification:
Product name: Turbo exhaust valve
Material: aluminum alloy
Color: black, blue, red
Product size: 95*77 mm
Gross weight: 750g
Applicable models: Universal

Epman Dual Piston Blow Off Valve - 25mm.

Dual piston blow off valve, suitable for 1.8T engines and others (2.0 Turbo Opel, Renault, 2.2T Audi, 2.7T Audi, etc.) with MAF sensor and 25mm inlet. Large stock available. A 25mm metal blanking plug is also included.
Available colors: - Black - Silver

Epman 50mm Blow Off Valve
 
This is the highest volume valve EPMAN has ever made, designed for motorsports!
With a 50mm (2") aluminum piston, so there are no issues with split diaphragms, we have yet to find the power limits of this valve! The piston uses heat-stabilized viton O-rings and Mobil 1 high-temperature grease to ensure a long life with minimal wear and very long service intervals.
The vacuum port is 6mm and fully 360-degree rotatable to suit any installation. This valve is suitable for custom installations only and cannot be installed on a silicone hose. You can choose the screw-on fitting option or the v-band fitting option with the corresponding adapters, which will then be included with your valve and which you can weld to any aluminum pipework in your installation, ideally as close as possible to the throttle body. Available in machine-finished silver or black.

Relief recirculating blow off valve Epman VAG 1.8T

Dual-port relief (blow off) valve, Forge Splitter type.
Can operate as a recirculating (Diverter Valve suitable for 1.8T and 2.7T and similar engines with a mass air flow sensor) and as an atmospheric (blow off) valve. Spring stiffness can be adjusted.

Epman Blow Off Valve 1.7 bar

Made from high-quality aluminum in black/silver/blue. Large valve for increased airflow. Adjustable spring, withstands up to 1.7 bar pressure. Easily adjustable to prevent pressure loss and compressor surge. Installation instructions not included. Color: Black/Silver/Blue. Applications: Universal fit for all turbo engines.

Blow-off adapter for VAG 1.4 1.8 2.0 TSI TFSI
 
This part does not fit 1.4 engines with both turbo and supercharger. It replaces the standard plastic valve, which is prone to failure. Suitable for: For Audi A3 1.4 1.8 2.0 TSI/FSTi Turbo For Audi A3 2.0 Turbo For Audi A4 1.8/2.0 Fsi Turbo, not fit for B9 For Audi A6 2.0 Fsi Turbo For Audi S3 2.0 Turbo 8P / 8V For Audi TT Mk2 2.0 Turbo For Audi TT MK2 TTS 2.0 Turbo For SEAT Altea 2.0 Turbo For SEAT Leon 1.4 Turbo TSI 125 For SEAT Leon 2.0 Turbo FSiT For Skoda Octavia 1.4 TURBO 140 For Skoda Octavia 2.0 Turbo For Volkswagen Beetle 2013 2.0 Petrol Turbo For Volkswagen Golf MK5 1.4 TURBO 140 For Volkswagen Golf Mk5 GTI 2.0 Turbo For Volkswagen Golf Mk5 GTI EDITION 30 ED30 For Volkswagen Golf Mk6 GTI ED35 2.0 Turbo For Volkswagen Golf R MK6 2.0 Turb For Volkswagen Passat 1.8/2.0 Fsi Turb For Volkswagen Scirocco 2.0 Turbo For Volkswagen Scirocco R 2.0 Turbo

Turbosmart Kompact 25mm blow-off valve, genuine
 
Genuine Turbosmart product – a fully recirculating BOV. The Plumb Back system recirculates all excess pressure back into the intake system. Suitable for enthusiasts who don't want to be noticed but want the performance and reliability benefits of a quality blow-off valve.
 
Most factory blow-off valves on mass-produced cars are made of plastic, unlike the incredibly durable machined construction of the Kompact series. Standard valves often fail to eliminate damaging compressor surge, and as cars age, the plastic becomes brittle and can crack, causing serious boost leaks. This prevents the turbo from reaching its full potential, robbing you of power.
 
With its anodized aluminum body and lightweight alloy piston, the Kompact offers exceptional durability, superior response, and excellent boost holding capability for its size.
 
The Kompact Dual Port is perfect for owners of stock to lightly modified cars.
 
Included:
 
Spring up to 0.6 bar (fitted)

Turbosmart GenV 50mm 7 psi Blow Off Valve, Genuine, Black
 
The Turbosmart RacePort is renowned for being an incredibly small and light BOV for race-level turbocharged engines. Featuring a unique design and internal flow structures, it is 50% lighter and 25% smaller than the competition, while delivering 330 CFM flow – making it the best BOV of its type on the market.
 
Comes with:

GenV Raceport 50mm BOV
1/8 NPT vacuum fittings
V-Band clamp
Profiled alloy weld-on fitting
Spring -18 to -14 InHg (installed)
Turbosmart sticker

VW Audi 2.0 FSI TSI TFSI MK5 GTI 06-13 Vacuum Adapter - Blow Off

Mount your boost gauge without having to drill into your manifold!

Application:

For 2010+ Audi A5 TSI

For 2009+ Audi A4 TSI

For 2006+ VW Jetta/GTI 2.0T FSI & TSI

For 2005+ VW Passat 2.0T FSI & TSI

Removable vacuum ports.

Boost gauge fitting.

The award-winning Compact EM series of upgraded blow-off valves are the world's first true plug-and-play upgrade solution for your factory valve. Disconnect and unbolt your OEM valve and install the Kompact EM. No adapters, hoses, or additional installation are required.
The Kompact EM valve series from Turbosmart uses motorsport-proven technology and adds a built-in proprietary solenoid system and internal pressure control channels. No reference hoses, separate solenoids, or useless parts – just bolt on and plug in!
You can count on unparalleled performance and reliability as a direct replacement for your factory BOV. Kompact EM valves overcome common failures associated with plastic factory valves through our boost-balance valve design (the more boost you have, the better it seals), a positive sealing O-ring on the piston face, and billet construction. Whatever your application, the Kompact EM series will maintain more boost and be more responsive in any environment.

The legend continues! Turbosmart's VeePort Pro is an evolution of the original VeePort, now 20% smaller and 33% lighter. Based on Turbosmart's BOV5 architecture, the VeePort Pro offers huge performance. Built on our motorsport proven Boost-Balance system utilizing a 38mm piston, this valve can easily flow up to around 600 HP when needed and hold as much boost as you can throw at it.

FORGE Motorsport - Atmospheric Discharge or Blow Off Valve, suitable for almost all turbo cars.

Atmospheric discharge or blow-off valve, suitable for all turbo cars without an air flow meter. This valve will operate flawlessly without needing attention and eliminates the longevity issues associated with original diaphragm valves. All single-piston and diaphragm atmospheric valves from Forge Motorsport are designed and manufactured with the intention of venting 100% of the residual charged air remaining in your forced induction system to the atmosphere when the throttle is lifted.
 
In the box:
1 x FMDV001GTI Valve1 x Forge Sticker