-
Exhaust systems
-
Tuning Intercoolers
-
Sports Suspension
-
Repair Kits
-
ATV parts
-
Brake System
Main menu
-
All categories
-
Exhaust systems
-
Tuning Intercoolers
-
EGR Delete Kits
-
Cooling
-
Engine
-
Sports Suspension
-
PDR Tools
-
Repair Kits
-
ATV parts
-
Power Tuning
-
Brake System
-
Your cart
See the discounts
Choose your Location
-
SelectParts.BG
IMPORTANT:
To reach the store, enter through the NasAuto car park, then go into the left-hand yard (behind NasAuto).
42.74574809271693, 23.317912911712536
Audi Performance & Tuning Parts
245 products
245 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
- 1.9 TDI
- Golf Mk4, Octavia 1U, Toledo 2 +1
€197,00 EUR
1.9 TDI Downpipe – RM Motors
Application
- VW Golf IV 1.9 TDI – 1998–2004, 90 / 101 / 110 / 115 / 130 / 150 hp
- VW Bora 1.9 TDI – 1998–2005, 90–150 hp
- Audi A3 8L 1.9 TDI – 1997–2003, 90 / 100 / 110 / 130 hp
- Seat Leon Mk1 1.9 TDI – 1999–2005, 90–150 hp
- Seat Toledo Mk2 1.9 TDI – 1998–2004, 90–150 hp
- Skoda Octavia Mk1 1.9 TDI – 1999–2004, 90 / 101 / 110 / 130 hp
- Drive: FWD
Please check fitment by VIN before ordering – send it to us and we will confirm.
Features
- Pipe diameter: 63.5 mm
- Diameter at the mid-pipe connection: 60 mm
- Made entirely of high-grade stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9)
- Every part is CNC-made
- 24-month manufacturer warranty
OE numbers
- 1J0253058NX
- 1J0253058GX
- 1J1253058RX
- 1J0253057AX
- 1J5253058X
- 1J0254505RX
- 1J0254505PX
- 1H1253058DX
- 1J0254506X
- 1J0254506AX
- 2.0 TDI
- Golf Mk7
€266,00 EUR
Downpipe Audi, Seat, Skoda, VW 1.6 / 2.0 TDI – VW Golf VII — RM Motors
Application
- VW Golf VII and related Audi, Seat, Skoda models with 1.6 / 2.0 TDI
- Years: 2013–
- Power: 90 / 105 / 110 / 150 / 184 hp
Features
- Pipe diameter: 63.5 mm
- Every part is CNC-made
- Acid-resistant stainless steel
OE numbers
OE numbers 12
Need a larger pipe? We also offer a 76 mm version with sensor ports.
- 2.7 TDI, 3.0 TDI, 3.0 V6, 4.2 V8
- A4 B6, A4 B7, A4 B8 +4
€13,00 EUR
Repair kit for fault P2015 — VAG 2.7 / 3.0 / 4.2 TDI
Fault P2015 (008213) is caused by a broken plastic stop on the swirl flap shaft in the manifold. Our bracket kit limits actuator travel to the original range — without replacing the whole actuator.
Advantages
- Installation in about 30 minutes
- Clears faults P2015, P2004, P2009, P2016, P2017
- Saves replacing the whole actuator
OEM actuator numbers
059129086J / 059129086L / 059129086G / 059129086K
OEM manifold numbers
059 129 712 BK / 059 129 712 BG / 059 129 712 P
Compatibility — Audi A4
- 8EC B7 — 2.7 TDI 163 HP (BSG), 180 HP (BPP), 3.0 TDI 204 HP (BKN), 233 HP (ASB)
- 8K2 B8 — 2.7 TDI 190 HP (CAMA, CGKA), 3.0 TDI 240 HP (CAPA, CCLA, CCWA)
- 8ED B7 Avant — 2.7 TDI 163/180 HP, 3.0 TDI 204/233 HP
- 8K5 B8 Avant — 2.7 TDI 190 HP, 3.0 TDI 240 HP
- 8KH B8 Allroad — 3.0 TDI 240 HP (CCWA)
- 8H7 B6/B7 Cabriolet — 2.7 TDI 180 HP, 3.0 TDI 204/233 HP
Compatibility — Audi A5
- 8T3 — 2.7 TDI 163 HP (CAMB, CGKB), 190 HP (CAMA, CGKA), 3.0 TDI 204/211/240/245 HP
- 8F7 Cabriolet — 2.7 TDI 190 HP, 3.0 TDI 204/240/245 HP
- 8TA Sportback — 2.7 TDI 190 HP, 3.0 TDI 204/240/245 HP
Compatibility — Audi A6
- 4F2 C6 — 2.7 TDI 163/180/190 HP (BSG, BPP, CANA, CANB, CANC, CAND), 3.0 TDI 211/225/233/240 HP (BNG, BMK, ASB, CDYA, CDYB, CDYC)
- 4G2 C7 — 3.0 TDI 204 HP (CLAA, CLAB), 245 HP (CKVB, CKVC), 313 HP (CGQB)
- 4F5 C6 Avant / 4G5 C7 Avant — same engines
- 4FH C6 Allroad — 2.7 TDI 163/180/190 HP, 3.0 TDI 211/233/240 HP
Compatibility — Audi A7 / A8 / Q5 / Q7
- A7 Sportback 4GA — 3.0 TDI 204/245/313 HP
- A8 4E — 3.0 TDI 211/233 HP; A8 4H — 3.0 TDI 204/211/250 HP
- Q5 8R — 3.0 TDI 240 HP (CCWA)
- Q7 4L — 3.0 TDI 211/224/233/240/245 HP (BUN, CASB, CATA, BUG, CASA, CCMA, CJGA, CJGB, CLZB, CRCA)
Compatibility — Volkswagen
- Touareg 7LA/7L6/7L7 — 3.0 V6 TDI 225 HP (BKS, CATA), 240 HP (CASA, CASC)
- Touareg 7P5 — 3.0 V6 TDI 204 HP (CASD, CJMA), 240 HP (CASA, CNRB), 245 HP (CJGD)
- Phaeton 3D — 3.0 V6 TDI 240 HP
Order online from SelectParts.bg with fast delivery across Bulgaria.
- Transporter T6
€32,00 EUR
PCV Delete Plate Kit for Volkswagen VW Audi SEAT Skoda.
Suitable for all Audi / VW cars with 2.0T FSI engines.
- Better fuel economy;
- Resolves power loss issues;
- Resolves rough idling;
- Made from lightweight 6061-T6 aluminum;
- Black anodized finish.
Our system fixes common issues with high fuel consumption, boost loss, and idling problems found in tuned and even stock 2.0T models.
This system converts your engine to a VACUUM ONLY based system.
Eliminates the chances of engine oil being sprayed all over the engine bay.
- 2.0 TDI
- Transporter T5
€29,00 EUR
EGR Blanks VW / Audi / Skoda 1.9 and 2.0 TDI
Kit contents
- 1 x 4mm EGR blanking plate
- 2 x 4mm EGR blanking plates
- 1 x 4mm gasket
- 2 x gaskets
- 2 x M8 nuts
- 1 x Adapter for the small coolant hose
- 1 x Adapter for the large coolant hose
Compatibility by model
Volkswagen:
- New Beetle 1.9 TDI BEW / ATD, 2002–2010
- Passat 2.0 TDI BGW, 2003–2005
- Camper 1.9 TDI BRR / BRS, 2004–2010
- Multivan Mk5 1.9 TDI BRR / BRS, 2006–2009
- Transporter T5 1.9 TDI BRR / BRS, 2006–2010
Audi:
- A4 / Avant / Quattro / Cabriolet 1.9 TDI BKE / BRB, 2005–2008
- A4 / Avant / Quattro / Cabriolet 2.0 TDI BPW / BRC, 2005–2008
Skoda:
- Superb 1.9 TDI BSV / BPZ, 2002–2008
- Superb 2.0 TDI BSS / BWW, 2002–2008
OEM EGR valve numbers
- 038 131 501 BF
- 038 131 501 BH
- 038 131 501 AD
- 3.0 TDI, 3.0 V6, CLAA, CLAB, CTBA, CDUC, CRCA
€11,00 EUR
EGR Blanking Plate VW / Audi 2.7 and 3.0 TDI V6
The kit contains gaskets and a blanking plate for the EGR valve.
Important: After removing the EGR valve, the EGR function must be disabled in software.
Compatible engine codes
- 2.7 TDI: CDUC, CDUD, CKVB, CKVC, CJMA, CGQB
- 3.0 TDI: CLAA, CLAB, CRCA, CNRB, CPNB, CTBA, CTBC, CTCB, CTCC, CVUA, CVUB, CVUC
Suitable for Audi A4, A5, A6, A7, A8, Q5, Q7, VW Touareg, Phaeton and other models with the listed engine codes. If you can't find your model, write to us!
- 1.8 T/TSI, 2.0 TFSI
€103,00 EUR
T25 cast iron turbo manifold for 2.0 TFSI EA113 with external wastegate port
The exhaust manifold collects the gases from the cylinders and feeds them to the turbo. In a turbo build the manifold is chosen first, because the turbo, downpipe and the layout of the other parts depend on it.
Specifications
- Engine: 2.0 TFSI EA113 (VW Group)
- Turbo flange: T25
- Turbo bolt spacing: 72 x 40 mm
- Outlet: 50 x 40 mm
- Wastegate bolt spacing: 70 mm
- Wastegate port: 35 mm
- Flange port diameter: 38 mm
- Material: cast iron (100%)
Not sure it fits your car? Send us your VIN and we will check compatibility before you order.
- 1.8 T/TSI
€75,00 EUR
T3 cast iron turbo manifold for Audi 1.8T
The exhaust manifold collects the gases from the cylinders and feeds them to the turbo. In a turbo build the manifold is chosen first, because the turbo, downpipe and the layout of the other parts depend on it.
Specifications
- Engine: Audi / VW 1.8T
- Turbo flange: T3
- Material: cast iron (100%)
- Brand: TurboWorks
Not sure it fits your car? Send us your VIN and we will check compatibility before you order.
- 1.8 T/TSI
€75,00 EUR
T25 cast iron turbo manifold for Audi 1.8T 20V
The exhaust manifold collects the gases from the cylinders and feeds them to the turbo. In a turbo build the manifold is chosen first, because the turbo, downpipe and the layout of the other parts depend on it.
Specifications
- Engine: Audi / VW 1.8T 20V
- Turbo flange: T25
- Turbo bolt spacing: 72 x 40 mm
- Material: cast iron (100%)
Not sure it fits your car? Send us your VIN and we will check compatibility before you order.
- 2.0 FSI, 2.0 TFSI
- Golf Mk5
€23,00 EUR
VW Audi 2.0 FSI TSI TFSI MK5 GTI 06-13 Vacuum Adapter - Blow Off
Mount your boost gauge without having to drill into your manifold!
Application:
For 2010+ Audi A5 TSI
For 2009+ Audi A4 TSI
For 2006+ VW Jetta/GTI 2.0T FSI & TSI
For 2005+ VW Passat 2.0T FSI & TSI
Removable vacuum ports.
Boost gauge fitting.
- AWX, AVF, ASZ, ARL, BTB, AXC, AXB, BLT, BPX, BUK, AUY, BVK
- A4 B5, Passat B5, A4 B6 +2
€37,00 EUR
EGR Delete / Race Pipe VAG 1.9 TDI
Kit contents
- 1 x EGR replacement — stainless steel, Ø57mm, length 100mm
- 1 x O-ring
- 2 x FMIC hose clamp
Compatibility by model
Audi:
- A3 1.9 TDI ASZ 96 kW, 2000–2003
- A4 B6 1.9 TDI AVF/AWX 96 kW, 2000–2004
- A6 C5 1.9 TDI AVF/AWX 96 kW, 2001–2005
Seat:
- Ibiza 1.9 TDI ASZ/BLT 96 kW, 2002–2009; BPX/BUK 118 kW, 2004–2008
- Cordoba 1.9 TDI ASZ/BLT 96 kW, 2002–2009
- Leon 1.9 TDI ASZ 96 kW, 2003–2006; ARL 110 kW, 2000–2006
- Toledo II 1.9 TDI ASZ 96 kW, 2003–2006; ARL 110 kW, 2000–2004
- Alhambra 1.9 TDI AUY/BVK 85 kW, 2000–2010; ASZ 96 kW, 2002–2008; BTB 110 kW, 2005–2007
Skoda:
- Fabia 1.9 TDI RS ASZ/BLT 96 kW, 2003–2008
- Octavia I 1.9 TDI ASZ 96 kW, 2002–2004
- Superb I 1.9 TDI AVF/AWX 96 kW, 2001–2008
Volkswagen:
- Bora / Bora Variant 1.9 TDI ASZ 96 kW / ARL 110 kW, 2000–2005
- Golf IV / Golf IV Variant 1.9 TDI ASZ 96 kW / ARL 110 kW, 2000–2005
- Passat B5 FL 1.9 TDI AVF/AWX 96 kW, 2001–2005
- Sharan 1.9 TDI AUY/BVK 85 kW / ASZ 96 kW / BTB 110 kW, 2000–2005
- Multivan V / Transporter V 1.9 TDI AXC 63 kW / AXB 77 kW, 2003–2009
OEM EGR valve numbers
- VAG: 038 131 501 AA, AL, J, AT, T, AB, AM
- Wahler: 7371D, 7372D, 7327D
€220,00 EUR
Downpipe FMIC.Pro 63 mm for VW, Audi, Seat, Skoda 1.6 / 2.0 TDI (2013–)
Sports FMIC.Pro downpipe for VAG group cars with 1.6 TDI and 2.0 TDI diesel engines built from 2013 onwards. Pipe outside diameter – 63 mm.
A downpipe is a key part of tuning any turbocharged car. Once installed, it reduces exhaust back-pressure, giving better low-rpm response (less turbo lag) as well as more power and torque (manufacturer claim).
Compatibility
- VW Golf VII and related Audi, Seat and Skoda models with 1.6 / 2.0 TDI
- Years: 2013–
- Power: 90 / 105 / 110 / 150 / 184 hp
Features
- Outside diameter: 63 mm
- High-grade stainless steel with a 1.5 mm wall
- Every component is CNC made – consistent quality and precise fit
- Flexible sections with internal reinforcement – a stronger construction that cannot be sucked inwards (manufacturer claim)
- Manufacturer: FMIC.Pro
Connections and ports
- 2 lambda sensor ports
- 3 temperature sensor ports
- 2 ports for the pressure sensor hose
Important
The downpipe replaces the factory catalytic converter / DPF unit, so ECU remapping is usually required. Before ordering, check your car’s engine and power output – if in doubt, contact SelectParts.BG.
Alternatives
We also offer the FMIC.Pro 76 mm version, as well as RM Motors downpipes for the same engines: 63.5 mm, 76 mm for VW Golf 7 and for Audi A3 8V. See all downpipes.
- 2.7 TDI, 3.0 TDI
- A6 C6
€185,00 EUR
Downpipe AUDI A6 C6 2.7, 3.0 TDI
2.7, 3.0 TDI
2005-2011
180, 190, 224, 233, 240 bhp
Quattro Aut.
Pipe diameter - 76 mm
Pipe diameter at the point of the connection with a middle section - 58 mm
Downpipe has the following connections:
- one lambda sensor bung
- two threaded bungs for a temperature sensor.
Downpipe has been completely made of high quality stainless steel (T304, X5CrNi18-10, 1.4301, AISI 304, 0H18N9). Each element was develop with CNC technology. 24 months manufacturer’s warranty for the product.
OE:
4F0254800X
4F0254800CX
4F0254800HX
€93,77 EUR
DBA Brake Discs Street Series - plain for Audi A4 - DBA2800
- Brand: DBA
- OEM number: DBA2800
- Compatibility: Audi A4
- Diameter [mm]: 312
- Vented disc: Yes
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 23
- Thickness [mm]: 25
- Height [mm]: 46.2
- Pitch circle [mm]: 112
- ECE R90 number: E11*90R02/06*59757*00
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€139,45 EUR
DBA Brake Discs Street Series - T2 for Audi A4 - DBA2800S
- Brand: DBA
- OEM number: DBA2800S
- Compatibility: Audi A4
- Diameter [mm]: 312
- Vented disc: Yes
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 23
- Thickness [mm]: 25
- Height [mm]: 46.2
- Pitch circle [mm]: 112
- ECE R90 number: E11*90R02/06*60529*00
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€144,28 EUR
DBA Brake Discs Street Series - X-GOLD for Audi A4 - DBA2800X
- Brand: DBA
- OEM number: DBA2800X
- Compatibility: Audi A4
- Diameter [mm]: 312
- Vented disc: Yes
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 23
- Thickness [mm]: 25
- Height [mm]: 46.2
- Pitch circle [mm]: 112
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€104,17 EUR
DBA Brake Discs Street Series - T2 for Audi A4 - DBA2801S
- Brand: DBA
- OEM number: DBA2801S
- Compatibility: Audi A4
- Diameter [mm]: 245
- Vented disc: No
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 8
- Thickness [mm]: 10
- Height [mm]: 39.8
- Pitch circle [mm]: 112
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€116,92 EUR
DBA Brake Discs Street Series - Slotted L/R for Audi A4 - DBA2801SL
- Brand: DBA
- OEM number: DBA2801SL
- Compatibility: Audi A4
- Diameter [mm]: 245
- Vented disc: No
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 8
- Thickness [mm]: 10
- Height [mm]: 39.8
- Pitch circle [mm]: 112
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€116,92 EUR
DBA Brake Discs Street Series - Slotted L/R for Audi A4 - DBA2801SR
- Brand: DBA
- OEM number: DBA2801SR
- Compatibility: Audi A4
- Diameter [mm]: 245
- Vented disc: No
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 8
- Thickness [mm]: 10
- Height [mm]: 39.8
- Pitch circle [mm]: 112
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€104,17 EUR
DBA Brake Discs Street Series - T2 for Audi A4 - DBA2802S
- Brand: DBA
- OEM number: DBA2802S
- Compatibility: Audi A4
- Diameter [mm]: 255
- Vented disc: No
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 10
- Thickness [mm]: 12
- Height [mm]: 40
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€25,60 EUR
DBA Brake Discs Street Series - plain for Audi A6 - DBA2803
- Brand: DBA
- OEM number: DBA2803
- Compatibility: Audi A6
- Diameter [mm]: 245
- Vented disc: No
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 8
- Thickness [mm]: 10
- Height [mm]: 53.8
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€101,14 EUR
DBA Brake Discs Street Series - T2 for Audi A6 - DBA2803S
- Brand: DBA
- OEM number: DBA2803S
- Compatibility: Audi A6
- Diameter [mm]: 245
- Vented disc: No
- Number of holes: 5
- Inner diameter [mm]: 68
- Minimum thickness [mm]: 8
- Thickness [mm]: 10
- Height [mm]: 53.8
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€75,34 EUR
DBA Brake Discs Street Series - En-Shield - plain for Audi A1 - DBA2806E
- Brand: DBA
- OEM number: DBA2806E
- Compatibility: Audi A1
- Diameter [mm]: 312
- Vented disc: Yes
- Number of holes: 5
- Inner diameter [mm]: 65
- Minimum thickness [mm]: 23
- Thickness [mm]: 25
- Height [mm]: 49.8
- Pitch circle [mm]: 112
- ECE R90 number: E11*90R02/06*59757*00
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€97,54 EUR
DBA Brake Discs Street Series - T2 for Audi A1 - DBA2806S
- Brand: DBA
- OEM number: DBA2806S
- Compatibility: Audi A1
- Diameter [mm]: 312
- Vent type: Kangaroo Paw
- Number of holes: 5
- Inner diameter [mm]: 65
- Minimum thickness [mm]: 23
- Thickness [mm]: 25
- Height [mm]: 49.8
- Pitch circle [mm]: 112
- ECE R90 number: E11*90R02/06*60529*00
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€139,45 EUR
DBA Brake Discs Street Series - X-GOLD for Audi A1 - DBA2806X
- Brand: DBA
- OEM number: DBA2806X
- Compatibility: Audi A1
- Diameter [mm]: 312
- Vent type: Kangaroo Paw
- Number of holes: 5
- Inner diameter [mm]: 65
- Minimum thickness [mm]: 23
- Thickness [mm]: 25
- Height [mm]: 49.8
- Pitch circle [mm]: 112
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€117,30 EUR
DBA Brake Discs Street Series - T2 for Audi A3 - DBA2807S
- Brand: DBA
- OEM number: DBA2807S
- Compatibility: Audi A3
- Diameter [mm]: 286
- Vented disc: No
- Number of holes: 5
- Inner diameter [mm]: 65
- Minimum thickness [mm]: 10
- Thickness [mm]: 11.7
- Height [mm]: 48.4
- Pitch circle [mm]: 112
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€139,45 EUR
DBA Brake Discs Street Series - X-GOLD for Audi A3 - DBA2807X
- Brand: DBA
- OEM number: DBA2807X
- Compatibility: Audi A3
- Diameter [mm]: 286
- Vented disc: No
- Number of holes: 5
- Inner diameter [mm]: 65
- Minimum thickness [mm]: 10
- Thickness [mm]: 11.7
- Height [mm]: 48.4
- Pitch circle [mm]: 112
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€126,59 EUR
DBA Brake Discs Street Series - T2 for Audi A3 - DBA2808S
- Brand: DBA
- OEM number: DBA2808S
- Compatibility: Audi A3
- Diameter [mm]: 345
- Vent type: Kangaroo Paw
- Number of holes: 5
- Inner diameter [mm]: 65
- Minimum thickness [mm]: 28
- Thickness [mm]: 30
- Height [mm]: 50
- Pitch circle [mm]: 112
- ECE R90 number: E11*90R02/06*60512*00
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€69,46 EUR
DBA Brake Discs Street Series - En-Shield - plain for Audi 2020- - DBA2809E
- Brand: DBA
- OEM number: DBA2809E
- Compatibility: Audi 2020-
- Diameter [mm]: 310
- Vent type: Kangaroo Paw
- Number of holes: 5
- Inner diameter [mm]: 65
- Minimum thickness [mm]: 20
- Thickness [mm]: 22
- Height [mm]: 48.5
- Pitch circle [mm]: 112
- ECE R90 number: E11*90R02/06*59755*00
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
€92,89 EUR
DBA Brake Discs Street Series - T2 for Audi 2020- - DBA2809S
- Brand: DBA
- OEM number: DBA2809S
- Compatibility: Audi 2020-
- Diameter [mm]: 310
- Vent type: Kangaroo Paw
- Number of holes: 5
- Inner diameter [mm]: 65
- Minimum thickness [mm]: 20
- Thickness [mm]: 22
- Height [mm]: 48.5
- Pitch circle [mm]: 112
- ECE R90 number: E11*90R02/06*60524*00
Delivery time - up to 14 working days
If you can't find the right discs for your car, please contact us
Showing 60/245
Performance and tuning parts for Audi – downpipes, exhaust systems, intercoolers, EGR solutions, turbo components and repair kits for diesel and petrol engines. Send us your VIN and we'll confirm fitment before you order. Shipping across Europe.
- Choosing a selection results in a full page refresh.
- Opens in a new window.